Difference between revisions of "Bitumen"
(→Blinding: m) |
(asstd minor) |
||
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[image:387px-Asphalt_base.jpg]] | [[image:387px-Asphalt_base.jpg]] | ||
| − | Bitumen is the black solid in tarmac roads. It has several uses in DIY, as [[adhesive]], roofing sheet, [[paint]], waterproofer and sealant, mortar, and of course in tarmac. | + | Bitumen is the black solid in 'tarmac' roads. It has several uses in DIY, as [[adhesive]], roofing sheet, [[paint]], waterproofer and sealant, mortar, and of course in tarmac. |
==Properties== | ==Properties== | ||
| − | Bitumen's slight flexibility enables roads to handle vibration from traffic, and enables roofing felts to bend, as long as they're not too cold. | + | Bitumen's slight flexibility enables roads to handle vibration from traffic, and enables [[roofing]] felts to bend, as long as they're not too cold. |
| − | When heated with a torch it melts, and molten bitumen is normally used at around | + | When heated with a torch it melts, and molten bitumen is normally used at around 200°C, making it a hazard to handle. It can soften to a degree in full sun on the hottest summer days. In midwinter it becomes stiffer still, making unmodified bitumen based roofing felt a problem to work with. This behaviour change over a wide temperature range occurs because bitumen is a mixture of over 200 different [[chemical]]s. |
| − | Bitumen sticks to almost anything, even polythene, but few things stick to it once | + | Bitumen sticks to almost anything, even polythene, but few things stick to it once it's dry. |
| − | Emulsified bitumen in water is usually acidic, sometimes strongly so. This adds handling issues and limits its uses. This | + | Emulsified bitumen in [[water]] is usually acidic, sometimes strongly so. This adds handling issues and limits its uses. This doesn't apply to other bitumen products. |
==Uses== | ==Uses== | ||
===Sealant=== | ===Sealant=== | ||
| − | Bitumen is totally waterproof, and sticks to most things. The slow drying time of [[oil|solvent]] bitumen can be an issue, and most things won't stick to bitumen unless | + | Bitumen is totally waterproof, and sticks to most things. The slow drying time of [[oil|solvent]] bitumen can be an issue, and most things won't stick to bitumen unless it's blinded with [[sand]]. |
===Glue=== | ===Glue=== | ||
| − | Bitumen is an effective [[glue]], and unlike most glues | + | Bitumen is an effective [[glue]], and unlike most glues it's 100% waterproof. But it's not one of the stronger glues. It's liquified with heat or solvent. |
| − | + | The slow drying time of [[oil|solvent]] bitumen is its big issue, and it lacks grab. | |
| − | + | ====Parquet==== | |
| + | Hot bitumen was widely used for sticking parquet floors down, and is still good for the job. | ||
| − | + | When regluing to existing bitumen is wanted, most glues won't stick to it, but more bitumen will. Specialist bitumen compatible glue is also available. | |
| + | |||
| + | ====Vinyl==== | ||
| + | Bitumen & [[oil|solvent]] is a candidate for sticking [[vinyl tile]]s onto damp floor slabs, as it's one of very few glues totally unaffected by [[damp]]. But it has its issues. | ||
| + | |||
| + | Bitumen in solvent has very little grab, and is very slow drying, letting the vinyl sometimes creep or curl up. Weights on the vinyl prevent curl. I leave them in place for a week. | ||
| + | |||
| + | Applying too much results in ooze from joints while drying, be mean with it. A [[paint]]ed layer is too thick, use a metal [[scraper]] on the screed to remove all excess. | ||
| + | |||
| + | ====Removal==== | ||
| + | Bitumen used as [[glue]] can be removed from non-porous surfaces with [[oil|solvent]] or heat. | ||
===Paint=== | ===Paint=== | ||
Bitumen used as [[paint]] isn't prone to peeling off, and it sticks the surface of the substrate together. It lasts extremely well out of the sun, and well in the sun when on a firm porous surface such as masonry. When it has no hard immovable substrate under it it tends to crack & split over time. | Bitumen used as [[paint]] isn't prone to peeling off, and it sticks the surface of the substrate together. It lasts extremely well out of the sun, and well in the sun when on a firm porous surface such as masonry. When it has no hard immovable substrate under it it tends to crack & split over time. | ||
| − | The black colour isn't | + | The black colour isn't always popular. Red pigment (iron oxide) can make bitumen brown or a very dull red. Iron oxide is sold as red cement colouring powder. |
Bitumen emulsion is sometimes used to renovate worn tarmac drives. It wears off after a bit. | Bitumen emulsion is sometimes used to renovate worn tarmac drives. It wears off after a bit. | ||
===Roofing felt, with fibres=== | ===Roofing felt, with fibres=== | ||
| − | Many roofing felts are simply bitumen and fibres. When a small patch is wanted | + | Many roofing felts are simply bitumen and fibres. When a small patch is wanted its also possible to use bitumen in solvent & synthetic fibre cloth. Natural fibres don't last as well. Roofing felt is usually finished with a light layer of sand or decorative stone waste. |
===DPC/Tanking=== | ===DPC/Tanking=== | ||
| − | Bitumen [[paint]] has long been used as a DPC in | + | Bitumen [[paint]] has long been used as a DPC in [[floor]]s & [[wall]]s. It's also used for tanking basements etc. |
| + | |||
| + | ===Tarmac & Bitmac=== | ||
| + | Tarmac was made with coal tar, and is not normally used now. Bitmac looks & works the same, and is made with bitumen. | ||
| + | |||
| + | There are 2 types of bitmac, hot lay and cold lay. Cold lay has added [[oil|paraffin, diesel or white spirit]] to soften it, so it doesn't need heating to apply it. It's slower setting than hot bitmac. | ||
| − | + | Bitmac must be rolled to compact it, and needs to be laid on a well compacted surface for it to last, eg hardcore and gravel rolled firm. A couple of inches of bitmac laid on soil by a dodgy cowboy can look great at first, but weeds soon grow through and it breaks up. | |
| − | |||
| − | + | Pay good attention to level and slope, any water puddling and freezing causes bitmac to fail early. | |
| − | + | Bitmac is much cheaper bought as bitmac than mixing your own. Scalpings (used road surface) can be had for around £200 per 20 ton truck load in 2010. Diesel is used to stop it sticking to things. | |
===Roof sheet=== | ===Roof sheet=== | ||
| − | Rigid roofing sheets such as | + | Rigid [[roofing]] sheets such as Corruline and Onduline are fibres stuck together with bitumen. |
===Paving Mortar=== | ===Paving Mortar=== | ||
| − | Bitumen is sometimes used as mortar between paving setts or slabs. | + | Bitumen is sometimes used as mortar between paving setts or slabs. It's a long lasting low maintenance option for paving, but not for cars travelling at speed. It resists weed growth & cracking, and looks good with most paving. The higher cost than sand limits its popularity. |
| + | |||
| + | http://www.pavingexpert.com/jointing09.htm | ||
===Damp treatment=== | ===Damp treatment=== | ||
| Line 57: | Line 74: | ||
===Asphalt=== | ===Asphalt=== | ||
| − | Asphalt is a mix of bitumen and clay, sometimes with added colourant, usually iron oxide. | + | Asphalt is a mix of bitumen and clay, sometimes with added colourant, usually iron oxide. It's laid and polished. The result is a very tough hardwearing long lasting floor with some antibacterial properties. |
===Timber treatment=== | ===Timber treatment=== | ||
| − | Bitumen is sometimes used to delay | + | Bitumen is sometimes used to delay [[rot]]ting of timber by waterproofing it. A classic example is bitumen coating the bottom section of [[fence]]posts to keep them from touching the wet soil. Coating the foot or so from ground level down delays rot, further down the [[wood]] is less rot prone. |
===Psoriasis=== | ===Psoriasis=== | ||
| Line 66: | Line 83: | ||
===Paper roof=== | ===Paper roof=== | ||
| − | The paper roof is a historic curiosity that was once a standard roof type in some parts of the country. It was made of layers of bitumen coated paper, and damage was often repaired with a household iron. | + | The paper roof is a historic curiosity that was once a standard roof type in some parts of the country. It was made of layers of bitumen coated paper, and damage was often repaired with a household iron. It's a predecessor of modern roofing felt. |
==Forms== | ==Forms== | ||
Bitumen comes in various forms | Bitumen comes in various forms | ||
| − | # Just bitumen. Heat to melt | + | # Just bitumen. Heat to melt and apply. |
# Bitumen in [[oil|solvent]]. Pour/brush on and let dry | # Bitumen in [[oil|solvent]]. Pour/brush on and let dry | ||
# Bitumen emulsion. Emulsified in water | # Bitumen emulsion. Emulsified in water | ||
# Roof repair gloop. Bitumen with fibres & [[oil|solvent]] | # Roof repair gloop. Bitumen with fibres & [[oil|solvent]] | ||
| − | # | + | # Bitmac. Bitumen with stone & chalk/clay. Cold lay also contains a little [[oil|solvent]] |
| − | # Roofing felt. Bitumen and fibres, capped with sand or stone waste | + | # Roofing felt. Bitumen and fibres, capped with [[sand]] or stone waste |
| − | # Roofing sheet. Bitumen and fibres | + | # Roofing sheet. Bitumen and fibres, rigid |
==Techniques== | ==Techniques== | ||
===Blinding=== | ===Blinding=== | ||
| − | Where | + | Where it's wanted for something to stick to bitumen, sand is sprinkled on while still wet. [[Cement]], [[paint]]s etc can then stick to the sand. |
===Roof repair gloop=== | ===Roof repair gloop=== | ||
| − | Bitumen is used to repair cracks and splits on roofs, both felt roofs and permanent roofs. The result doesn't last | + | Bitumen is used to repair cracks and splits on roofs, both felt roofs and permanent roofs. The result doesn't last long term, but it has its uses. |
| + | |||
| + | Mixing chopped fibres into bitumen enables it to last better on a roof. The fibres reduce its tendency to crack. Synthetic fibres last much better than rottable natural fibres, glass fibre lasts best. | ||
| + | |||
| + | Bitumen is not suitable to repair EPDM, they are not compatible. | ||
| − | |||
===Solvents=== | ===Solvents=== | ||
Petrochemical [[oil|solvents]] are used with bitumen. Choice of solvent affects drying times. From slowest to fastest: | Petrochemical [[oil|solvents]] are used with bitumen. Choice of solvent affects drying times. From slowest to fastest: | ||
| − | * Diesel | + | * Diesel - very slow |
* Paraffin - [[paint]] dries out in a couple of days in summer | * Paraffin - [[paint]] dries out in a couple of days in summer | ||
| − | * heating oil & lamp oil - as paraffin | + | * [[heating]] oil & lamp [[oil]] - as paraffin |
| − | * White spirit - | + | * White spirit - relatively quick |
* Petrol - not safe to use | * Petrol - not safe to use | ||
* Lighter gas - evaporates in seconds, usable for removing small spots of bitumen, but other [[oil|solvents]] are preferable. | * Lighter gas - evaporates in seconds, usable for removing small spots of bitumen, but other [[oil|solvents]] are preferable. | ||
| Line 102: | Line 122: | ||
# Blow torch to melt the underside, then apply it, pressing it down | # Blow torch to melt the underside, then apply it, pressing it down | ||
# Stick it down with bitumen in [[oil|solvent]] | # Stick it down with bitumen in [[oil|solvent]] | ||
| − | # Clout nails | + | # Clout [[nails]] |
| + | # Nailed battens on top of the felt | ||
| − | Most better quality roofing felts use modified bitumen, which stays flexible in cold weather. The longer life of good felts comes primarily from the synthetic fibre content, whereas cheap felt uses mixed rag, which contains a high percentage of rottable natural fibres. | + | Most better quality roofing felts use modified bitumen, which stays flexible in cold weather. The longer life of good and mid-quality felts comes primarily from the synthetic fibre content, whereas cheap felt uses mixed rag, which contains a high percentage of rottable natural fibres. The best felt uses glass fibre. |
===Tarred roof=== | ===Tarred roof=== | ||
| − | The tarred roof is the ancestor of roofing felt. | + | The tarred roof is the ancestor of roofing felt. Boards, tar & sand. |
===Boiling=== | ===Boiling=== | ||
| − | When hot | + | When hot bitumen's wanted, it's usually heated to at least 200C in a bucket on a [[gas]] ring. The high temperature plus its sticky nature makes it a serious burn risk, requiring protective clothing. |
===Torching=== | ===Torching=== | ||
| − | Playing a torch flame on the surface of bitumen to melt it makes it stick. | + | Playing a torch flame on the surface of bitumen to melt it makes it stick. A common technique used with torch-on roofing felt. |
| + | |||
| + | Hot work is a fire risk & is much disliked by insurance companies. Refused claims have occurred. | ||
===Fibre reinforcing=== | ===Fibre reinforcing=== | ||
| Line 120: | Line 143: | ||
===Filling=== | ===Filling=== | ||
Bitumen can be filled with low cost powders such as chalk & clay to reduce cost. Many bitumen products already contain fillers. | Bitumen can be filled with low cost powders such as chalk & clay to reduce cost. Many bitumen products already contain fillers. | ||
| + | |||
| + | Bitumen plus sand works as a roof crack/gap filler. | ||
==Terminology== | ==Terminology== | ||
;Bitumen | ;Bitumen | ||
| − | :the black solid fraction of crude oil that fails to boil at | + | :the black solid fraction of crude oil that fails to boil at 400°C |
;Tar | ;Tar | ||
| Line 130: | Line 155: | ||
;Tarmac | ;Tarmac | ||
| − | :nowadays this is stone, bitumen and clay or chalk. Tarmac was | + | :nowadays this is bitmac made of stone, bitumen and clay or chalk. Tarmac was made with coal tar, they look the same. |
;Asphalt | ;Asphalt | ||
| − | :Pronounced ass fault or ash felt, this is a mixture of bitumen and clay often used for | + | :Pronounced ass fault or ash felt, this is a mixture of bitumen and clay often used for [[floor]]ing in large buildings |
===US Terminology=== | ===US Terminology=== | ||
| Line 142: | Line 167: | ||
==See also== | ==See also== | ||
| + | [[Roofing felt]] | ||
| + | |||
Latest revision as of 23:16, 29 July 2020
Bitumen is the black solid in 'tarmac' roads. It has several uses in DIY, as adhesive, roofing sheet, paint, waterproofer and sealant, mortar, and of course in tarmac.
Properties
Bitumen's slight flexibility enables roads to handle vibration from traffic, and enables roofing felts to bend, as long as they're not too cold.
When heated with a torch it melts, and molten bitumen is normally used at around 200°C, making it a hazard to handle. It can soften to a degree in full sun on the hottest summer days. In midwinter it becomes stiffer still, making unmodified bitumen based roofing felt a problem to work with. This behaviour change over a wide temperature range occurs because bitumen is a mixture of over 200 different chemicals.
Bitumen sticks to almost anything, even polythene, but few things stick to it once it's dry.
Emulsified bitumen in water is usually acidic, sometimes strongly so. This adds handling issues and limits its uses. This doesn't apply to other bitumen products.
Uses
Sealant
Bitumen is totally waterproof, and sticks to most things. The slow drying time of solvent bitumen can be an issue, and most things won't stick to bitumen unless it's blinded with sand.
Glue
Bitumen is an effective glue, and unlike most glues it's 100% waterproof. But it's not one of the stronger glues. It's liquified with heat or solvent.
The slow drying time of solvent bitumen is its big issue, and it lacks grab.
Parquet
Hot bitumen was widely used for sticking parquet floors down, and is still good for the job.
When regluing to existing bitumen is wanted, most glues won't stick to it, but more bitumen will. Specialist bitumen compatible glue is also available.
Vinyl
Bitumen & solvent is a candidate for sticking vinyl tiles onto damp floor slabs, as it's one of very few glues totally unaffected by damp. But it has its issues.
Bitumen in solvent has very little grab, and is very slow drying, letting the vinyl sometimes creep or curl up. Weights on the vinyl prevent curl. I leave them in place for a week.
Applying too much results in ooze from joints while drying, be mean with it. A painted layer is too thick, use a metal scraper on the screed to remove all excess.
Removal
Bitumen used as glue can be removed from non-porous surfaces with solvent or heat.
Paint
Bitumen used as paint isn't prone to peeling off, and it sticks the surface of the substrate together. It lasts extremely well out of the sun, and well in the sun when on a firm porous surface such as masonry. When it has no hard immovable substrate under it it tends to crack & split over time.
The black colour isn't always popular. Red pigment (iron oxide) can make bitumen brown or a very dull red. Iron oxide is sold as red cement colouring powder.
Bitumen emulsion is sometimes used to renovate worn tarmac drives. It wears off after a bit.
Roofing felt, with fibres
Many roofing felts are simply bitumen and fibres. When a small patch is wanted its also possible to use bitumen in solvent & synthetic fibre cloth. Natural fibres don't last as well. Roofing felt is usually finished with a light layer of sand or decorative stone waste.
DPC/Tanking
Bitumen paint has long been used as a DPC in floors & walls. It's also used for tanking basements etc.
Tarmac & Bitmac
Tarmac was made with coal tar, and is not normally used now. Bitmac looks & works the same, and is made with bitumen.
There are 2 types of bitmac, hot lay and cold lay. Cold lay has added paraffin, diesel or white spirit to soften it, so it doesn't need heating to apply it. It's slower setting than hot bitmac.
Bitmac must be rolled to compact it, and needs to be laid on a well compacted surface for it to last, eg hardcore and gravel rolled firm. A couple of inches of bitmac laid on soil by a dodgy cowboy can look great at first, but weeds soon grow through and it breaks up.
Pay good attention to level and slope, any water puddling and freezing causes bitmac to fail early.
Bitmac is much cheaper bought as bitmac than mixing your own. Scalpings (used road surface) can be had for around £200 per 20 ton truck load in 2010. Diesel is used to stop it sticking to things.
Roof sheet
Rigid roofing sheets such as Corruline and Onduline are fibres stuck together with bitumen.
Paving Mortar
Bitumen is sometimes used as mortar between paving setts or slabs. It's a long lasting low maintenance option for paving, but not for cars travelling at speed. It resists weed growth & cracking, and looks good with most paving. The higher cost than sand limits its popularity.
http://www.pavingexpert.com/jointing09.htm
Damp treatment
Bitumen paint is sometimes used as a remedy for damp. It is waterproof, but painting the outside of historic houses with it can make damp worse by preventing evaporation. Painting the interior of basements and retaining walls produces a dry interior surface, but increases the water content within the wall, which can occasionally lead to joist rot.
Asphalt
Asphalt is a mix of bitumen and clay, sometimes with added colourant, usually iron oxide. It's laid and polished. The result is a very tough hardwearing long lasting floor with some antibacterial properties.
Timber treatment
Bitumen is sometimes used to delay rotting of timber by waterproofing it. A classic example is bitumen coating the bottom section of fenceposts to keep them from touching the wet soil. Coating the foot or so from ground level down delays rot, further down the wood is less rot prone.
Psoriasis
Coal tar has long been used to treat psoriasis, and is very effective. Concerns about its safety have led to bitumen being used in its place. The resulting appearance discourages most people from using it this way, despite its effectiveness.
Paper roof
The paper roof is a historic curiosity that was once a standard roof type in some parts of the country. It was made of layers of bitumen coated paper, and damage was often repaired with a household iron. It's a predecessor of modern roofing felt.
Forms
Bitumen comes in various forms
- Just bitumen. Heat to melt and apply.
- Bitumen in solvent. Pour/brush on and let dry
- Bitumen emulsion. Emulsified in water
- Roof repair gloop. Bitumen with fibres & solvent
- Bitmac. Bitumen with stone & chalk/clay. Cold lay also contains a little solvent
- Roofing felt. Bitumen and fibres, capped with sand or stone waste
- Roofing sheet. Bitumen and fibres, rigid
Techniques
Blinding
Where it's wanted for something to stick to bitumen, sand is sprinkled on while still wet. Cement, paints etc can then stick to the sand.
Roof repair gloop
Bitumen is used to repair cracks and splits on roofs, both felt roofs and permanent roofs. The result doesn't last long term, but it has its uses.
Mixing chopped fibres into bitumen enables it to last better on a roof. The fibres reduce its tendency to crack. Synthetic fibres last much better than rottable natural fibres, glass fibre lasts best.
Bitumen is not suitable to repair EPDM, they are not compatible.
Solvents
Petrochemical solvents are used with bitumen. Choice of solvent affects drying times. From slowest to fastest:
- Diesel - very slow
- Paraffin - paint dries out in a couple of days in summer
- heating oil & lamp oil - as paraffin
- White spirit - relatively quick
- Petrol - not safe to use
- Lighter gas - evaporates in seconds, usable for removing small spots of bitumen, but other solvents are preferable.
Roofing felt
Applied with any of the following:
- Blow torch to melt the underside, then apply it, pressing it down
- Stick it down with bitumen in solvent
- Clout nails
- Nailed battens on top of the felt
Most better quality roofing felts use modified bitumen, which stays flexible in cold weather. The longer life of good and mid-quality felts comes primarily from the synthetic fibre content, whereas cheap felt uses mixed rag, which contains a high percentage of rottable natural fibres. The best felt uses glass fibre.
Tarred roof
The tarred roof is the ancestor of roofing felt. Boards, tar & sand.
Boiling
When hot bitumen's wanted, it's usually heated to at least 200C in a bucket on a gas ring. The high temperature plus its sticky nature makes it a serious burn risk, requiring protective clothing.
Torching
Playing a torch flame on the surface of bitumen to melt it makes it stick. A common technique used with torch-on roofing felt.
Hot work is a fire risk & is much disliked by insurance companies. Refused claims have occurred.
Fibre reinforcing
Fibres are often added to make the bitumen tougher. Roofing felt and rigid sheets are the prime use for this approach, but fibre can also be added to painted bitumen to reduce its tendency to crack. Fibres can be mixed into the paint can, or sprinkled on the painted surface then over painted.
Filling
Bitumen can be filled with low cost powders such as chalk & clay to reduce cost. Many bitumen products already contain fillers.
Bitumen plus sand works as a roof crack/gap filler.
Terminology
- Bitumen
- the black solid fraction of crude oil that fails to boil at 400°C
- Tar
- similar to bitumen, but made from coal. Not generally used now
- Tarmac
- nowadays this is bitmac made of stone, bitumen and clay or chalk. Tarmac was made with coal tar, they look the same.
- Asphalt
- Pronounced ass fault or ash felt, this is a mixture of bitumen and clay often used for flooring in large buildings
US Terminology
The differences in US terminology can cause confusion on the internet
- What we call bitumen, the US calls asphalt.
- What we call tarmac, the US calls pavement or asphaltic concrete, so road surface is sometimes called pavement.