Difference between revisions of "Cement mixing"
(tidy) |
(m) |
||
| Line 5: | Line 5: | ||
=Cement mixer= | =Cement mixer= | ||
| − | Very popular, but too expensive and bulky for small jobs. [[Storage]] is often impractical. | + | Very popular, but too expensive and bulky for small jobs. [[Storage]] is often impractical. Often cost effective to buy one for a job then resell afterwards. |
Always rinse out before the [[cement]] sets if you want the machine to last well. | Always rinse out before the [[cement]] sets if you want the machine to last well. | ||
| Line 21: | Line 21: | ||
When used with haired or fibre reinforced [[Mortar Mixes|mortar mixes]] these tend to form 'dead mice' on the paddles (clumps of hair). | When used with haired or fibre reinforced [[Mortar Mixes|mortar mixes]] these tend to form 'dead mice' on the paddles (clumps of hair). | ||
| − | Hand held paddle mixers for use in drills put a lot of load on a drill. A high power low speed mixing drill should be used. Using paddles in a cordless drill is | + | Hand held paddle mixers for use in drills put a lot of load on a drill. A high power low speed mixing drill should be used. Using paddles in a cordless drill is pushing it. |
| − | A small makeshift paint mixer can be made by bending some 2mm iron wire if you keep the shaft short and the stirrer narrow. These are only usable for paint mixing, not mortar. | + | A small makeshift paint mixer can be made by bending some 2mm [[iron wire]] if you keep the shaft short and the stirrer narrow. These are only usable for [[paint]] mixing, not mortar. |
| Line 29: | Line 29: | ||
Mix [[sand]] & [[cement]] dry on [[Sheet Materials|board]]. Make a ring of the mixture. Add a little [[Water|water]] in the middle and fold the dry mix in. Repeat until mixed. | Mix [[sand]] & [[cement]] dry on [[Sheet Materials|board]]. Make a ring of the mixture. Add a little [[Water|water]] in the middle and fold the dry mix in. Repeat until mixed. | ||
| − | + | It's not practical to use a plastic sheet instead of the board, the rigidity is needed. | |
| Line 35: | Line 35: | ||
[[image:Cement mixing tray 5421-3.jpg|right|185px]] | [[image:Cement mixing tray 5421-3.jpg|right|185px]] | ||
| − | This is a flat [[Sheet Materials|board]] with raised edges. Mix dry materials, then add [[Water|water]] and mix in. | + | This is a flat [[Sheet Materials|board]] with raised edges. Mix dry materials, then add [[Water|water]] and mix in. No need to maintain a ring of mixture to prevent [[Water|water]] escape, making it quicker. |
| Line 43: | Line 43: | ||
=Fast Bucket Method= | =Fast Bucket Method= | ||
| − | For small amounts | + | For small amounts it's faster to toss the bucket than mix with a small shovel. The [[Hand Tools|bucket]] needs to be a quarter full or less. Shake the bucket rapidly up & down in an oval '''()''' shaped motion, and the contents go round and mix very quickly. At 2 tosses a second, a batch can be done in 20 seconds once the [[Water|water]] is added. Energetic work, but very quick. |
Latest revision as of 03:36, 31 July 2020
There are several ways to mix mortars.
In almost all cases the dry components are mixed first, then water is added and mixed in. There are also times when mixes are used dry.
Cement mixer
Very popular, but too expensive and bulky for small jobs. Storage is often impractical. Often cost effective to buy one for a job then resell afterwards.
Always rinse out before the cement sets if you want the machine to last well.
Can be used to break soft bricks down into powder/pieces which can be incoporated into some mortars. See Pozzolan for information.
Can also be used to break glass into cullet. Add the glass and add a hard brick. Ditto scrap tiles.
Paddle Mixer
See Paddle mixer
Better suited to paints and lime mortar than cement.
When used with haired or fibre reinforced mortar mixes these tend to form 'dead mice' on the paddles (clumps of hair).
Hand held paddle mixers for use in drills put a lot of load on a drill. A high power low speed mixing drill should be used. Using paddles in a cordless drill is pushing it.
A small makeshift paint mixer can be made by bending some 2mm iron wire if you keep the shaft short and the stirrer narrow. These are only usable for paint mixing, not mortar.
Board & Shovel
Mix sand & cement dry on board. Make a ring of the mixture. Add a little water in the middle and fold the dry mix in. Repeat until mixed.
It's not practical to use a plastic sheet instead of the board, the rigidity is needed.
Sandpit
This is a flat board with raised edges. Mix dry materials, then add water and mix in. No need to maintain a ring of mixture to prevent water escape, making it quicker.
Bucket & Shovel
Don't fill too full, or you won't be able to mix. Over half full is hard to mix. Some tendency not to mix material at the bottom well, so the bottom of the mix needs extra attention.
Fast Bucket Method
For small amounts it's faster to toss the bucket than mix with a small shovel. The bucket needs to be a quarter full or less. Shake the bucket rapidly up & down in an oval () shaped motion, and the contents go round and mix very quickly. At 2 tosses a second, a batch can be done in 20 seconds once the water is added. Energetic work, but very quick.
Tarpaulin
Place tarp on the ground, in a shallow hollow depression if available. Mix dry sand & cement, add water, then 2 people lift opposite corners alternately to mix the mortar. Quick.
Mortar Board
Very small amounts can be mixed on a hand held mortar board with a trowel. The same ring technique is used as with a full size board.
Mega mixer
For really large batches it is possible to make a giant mixer driven by a car engine. These can be scaled up versions of a cement mixer for cement mortars, or a giant version of a food processor for Papercrete and similar formulae.
Suited to large cement mixing jobs, Papercrete and similar mixtures. Making one is not a trivial exercise. Purchasing an industrial mixer is prohibitive.
http://www.livinginpaper.com/mixers.htm