Making Concrete Blocks

From DIYWiki
Revision as of 00:20, 17 January 2007 by NT (talk | contribs) (article written)
Jump to navigation Jump to search

Concrete Blocks intro



The standard mix for Concrete Blocks is 1:3:5, 1 part cement to 3 parts sand and 5 parts stone aggregate, by volume.

Note that the ratio is different by weight, since all ingredients do not have the same density.

Many other mixes are also possible, some of which incorporate other materials such as

  • clay
  • subsoil
  • brick
  • tiles
  • ash
  • other pozzolans
  • expanded polystyrene
  • straw
  • glass
  • fibres for crack control
  • clinker

and so on.

Bulky additives such as brick, tile & glass should be broken down in a mixer first.

There are also non-concrete mix options, such as adobe, papercrete, and so on.


Concrete blocks can be basic and functional or pretty & very decorative. Its a matter of choice, imagination, and a little extra work. While concrete blocks are too often ugly, there is no need at all to make them so. The only reasons for ugliness are 'I cant be bothered to make them look decent' and 'I didnt know it could be done.'

Beautiful concrete block walls come from thses aspects:

  • shape
  • colour
  • finish
  • added decoration
  • Overall design scheme


As well as decorative finishes, decorative block shapes can also be used to add character to a wall.

If you're building an external wall you may wish to mould a decorative topping for it. Imagination is usually the limit here. A simple easy option is to pour concrete into lengths of 4" pipe. These smooth round sections are mortared onto the top of the wall.

A special small mould can be made of decorative shapes, and cast with cement to produce a few pieces to add character to a wall. Items like gargoyles, roses and so on can be made this way. Even jelly moulds can be successfully used in some cases.

If you're more adventurous you could make blocks of an interlocking non-rectangular shape to construct the wall. Ensure the shape leads to a stable block stack, is not too hard to mould or work with, that neat vertical wall ends are straightforward to produce, that the mould is not fiendish to make, and that the pattern tolerates slight inaccuracies in block dimensions.

Not all blocks need to be the same shape, and not all mortar lines need be the same thickness. A minority of differently shaped blocks can be used to make a geometric design.

The apearance of small blocks can be achieved without the labour by moulding in grooves which are pointed as the wall is built. This can be done to for example make interlocking rectangular blocks look like square non-interlocking blocks.

Simple novel low garden walls can be made by casting blocks in short plastic pipe sections, and stacking them in overlapping layers with the flat ends up & down.

As well as bulk shape there is detail shape. For instance a shaped groove can be moulded into blocks so it runs round the edge of the wall. Or some blocks could be cast with one round edge (4" pipe is handy), so the top of the finished wall is rounded, and any exposed wall end too.

For a flamboyant example of how concrete blockwork can be highly decorative, take a look at the famous Concrete Castle. Constructed in 1851 out of 17 different (then experimental) mixes of concrete, it is every bit as elaborate and richly designed as any king's castle.

There really is no reason to make visible concrete walls ugly.


Block walls do not have to use all blocks of the same colour. A decorative line of a 2nd colour block, or better a line of extra-thin blocks (eg 1" or 2" high), can all help bring the wall's character alive.

A little decoration can also be made using a mixture of block colours. An area of chequer pattern is sometimes seen on old brick walls.

A line of alternating colour blocks may be run around the perimeter of the wall.

These are common basic patternings, with imagination you can do something more.


Many materials can colour blocks:

  • White cement - white
  • Grey cement - grey
  • Stone chips - many colours available
  • Clinker - dark
  • Glass - crushed glass available in many colours. Sparkling finish.
  • Tiles - any colour you like
  • Brick dust - red brick is high in iron oxide and pozzolanic
  • Iron oxide - dull red, makes pink, red, & brown
  • Cement dyes - prone to fade and streak over time, so better avoided
  • Coal ash - makes black mortar. Some black mortar can fail prematurely, so use it sparingly.
  • Clay & subsoil - brown

Where colourants cost more than bulk concrete, which is true in most cases, the coloured mix is laid in a thin layer in the mould then bulk concrete added to fill the mould.

Large pieces need breaking up before use. Bricks, tiles, clinker, glass bottles should all be broken up. An easy way to do this is put the material plus a hard brick in a cement mixer.

Where it is required to concentrate solid colourants at the face of the block, the pieces are sprinkled or laid out in the mould and concrete poured on. Take some care with the pouring so it does not disturb the coloured pieces. This method is especially suited to tile pieces, which dont look so good if exposed the wrong way up. The concrete should then be tasmped or vibrated to eliminate air pockets.

When using surface sprinkled blocks, don't overlook the fact that you will need some blocks with 2 fair faces. These take significantly longer to mould.

If your imagination still hasn't fired up, try thinking about:

  • a white cement finish with black stone chips
  • black cement (ash & dye) with clear glass sparkling in it.
  • white cement with purple sparkly glass pieces
  • dull red cement (brick colour) 2" blocks with white cement pointing.
  • brown cement with mixed colour tile mosaic pieces
  • an almost all white wall with pieces of 1" high red block scatterd here and there
  • white cement with marbled colour streaks in pale pink, pale grey etc
  • white wall peppered with grey cement powder dots. Sprinkle it in the mould first.


Ugly blocks need rendering & painting just to make them look ok. Save yourself years of repainting and make them look good in the first place.

Some block finish options

Wood finish - riven wood riven stone finish- riven slate

Planting holes may be made for small rock plants or trailing strawberries. Ensure a good freezeproof concrete mix is used for these blocks.

Bottle holes


Moulds may be made from 2x4 and lined with polythene. Other wood sizes and mould release agents can also be used if preferred. Dividers between mould cavities may be made with 1" wood.

To get a good flat smooth face on one side, use a mould base of sheet wood with polythene on it, and sit the polythene lined frame onto this. Take care the polythene is fully flat, and does not ruck or fold.

For a faster perfect finish, it is possible to use a sheet of glass resting on wood sheet as the base. The glass must be well supported. For cost reasons this is generally only practical if you already have a large sheet of glass to hand.

Cut and assemble wood moulds accurately to obtain blocks of accurate shape, which will always look better than inaccurately shaped blocks.

One moulding tip comes readily to mind: make the mould such that a small percentage of half blocks get produced. This saves work during construction.

If you plan to run wiring in a 4" block wall, again you can save work by fitting 1"x1" strips of wood to some of the moulds so as to make ready cast wiring channels.


Several options exist for compacting the mix in the mould:

  • do nothing
  • tamp & level with a strip of wood - most common option
  • vibrating poker - common on commercial sites
  • low pressure press - may be done with weights
  • high pressure press - probably not practical for diy use

Block Types

High vs low strength blocks

Final block compressive strength is determined by

  • the mixture (1:3:5 is strongest)
  • the amount of water used in the mix (the less the stronger)
  • how well the mortar is compacted in the mould (stiff mixes can be difficult to compact)

The highest possible strength blocks are made with a semi-dry mix and compacted by a hydraulic press.

Solid vs hollow

For light duty use such as most internal dividing walls, hollow blocks will be strong enough, as well as being cheaper to make and lighter to carry. The central plug in the mould is usually slightly tapered to make withdrawal easy.

When a non-tapered plug is wanted, it may be made in 2 or more pieces such that withdrawing one tapered piece loosens the other pieces in contact with the concrete.

When a reinforced wall is wanted, hollow blocks may be used, reinforcing bar fitted, concrete poured into the wall, and the poured mix poker vibrated to release air pockets. Each pour should be limited to 1m depth, and fall of the concrete during pour must also be similarly limited to avoid separation of the components.


Foamed or aerated concrete is made by adding aluminium powder to the mix. There are probably few diyers who have experience of doing this.

Another way to make light blocks is to use LECA, perlite or expanded polystyrene as the aggregate or part of the aggregate.

Lightweight blocks have much lower weight, compressive strength and freeze cycle resistance, and better thermal insulation.

No fines

Blocks made without fine aggregate are slightly lighter and cheaper, weaker, and not freeze cycle tolerant.

Garbage fill

Hollow blocks can be filled with a mix of non-expanding garbage and cement mortar, or solid blocks can have garbage dumped in the centre during pour. This gives a greater total load carrying ability than a hollow block while reducing cost.

This is an effective way to reduce cost by using unwanted hard materials such as broken concrete, brick, removed plaster and so on.

Testing Strength

Where a high strength block is needed, it may be necessary to make some test blocks ahead of time and test their strength.

To determine the strength of your test block, let it cure fully first (which can take a month). Then pile up the following in this order on a strong flat level surface:

  • sheet wood
  • your test block
  • sheet wood
  • weights

The sheets of wood are to even the load over the whole surface of the block.

Just keep adding more weight onto the block until it crumbles. (Don't stand close enough for toe injury.) Knowing the weight you added and the top surface area of the block, you can calculate the pressure at which it failed.

In real life applications you must keep loading far below this figure. A substantial loading margin is needed as this failure load figure must never be reached even in the worst of conditions, eg a fully loaded structure in a hurricane.

Maximising Strength

  • Optimum 1:3:5 mix
  • low water content, a semi-dry mix
  • good compression of mix in mould
  • fibres to reduce cracking

Alternatives to Concrete Blocks

  • Poured concrete
  • Adobe
  • Papercrete
  • various non-block construction methods.

See Also

Cement Mixing

Concrete & Mortar

Disposal Options

Some block finish options discussed


Concrete Castle: 2nd & 3rd pics