Rub-r-Slate

From DIYWiki
Revision as of 19:56, 18 May 2013 by NT (talk | contribs) (m)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Rub-r-Slate is a low cost home made composite surfacing material suitable for floors, countertops, roofing tiles & panels.


"Essentially Jack discovered that using asphalt (hot mix), OR Asphalt Emulsion (AE) mixed with clay, shredded cardboard and/or sawdust and other dry materials like sand, cement, plus some other additives, gave a hard wearing but extremely foot comfortable substance good for floors and roofing. It can be poured, troweled, rolled, sprayed, tamped, stamped and molded while still drying.

Jack even describes coating sheets of paper/cardboard with it to premake panels for laying as floor tiles, or wall surface. It can also be used for a damp proof course"

Introduction to Rub-r-Slate

We haven't tried this stuff on uk.d-i-y yet. It bears a fair resemblance to low cost roofing shingles, which are stone surfaced bitumen coated card.


See Also

Wiki Contents

Wiki Subject Categories