Difference between revisions of "Steam bending"
(see also, wood cat) |
(headerified 2 lines) |
||
| Line 1: | Line 1: | ||
| − | Basics of steam-bending wood | + | ==Basics of steam-bending wood== |
A wallpaper steam-stripper is an appropriately sized source of steam for smaller items. | A wallpaper steam-stripper is an appropriately sized source of steam for smaller items. | ||
| Line 13: | Line 13: | ||
Once ready, take the piece out (gloves) and quickly clamp it to a former in the desired shape (may be better to overbend it, as some spring-back will happen). | Once ready, take the piece out (gloves) and quickly clamp it to a former in the desired shape (may be better to overbend it, as some spring-back will happen). | ||
| − | Tips | + | ==Tips== |
The length of steaming is trial and error until you gain some experience. | The length of steaming is trial and error until you gain some experience. | ||
Revision as of 08:37, 10 May 2007
Basics of steam-bending wood
A wallpaper steam-stripper is an appropriately sized source of steam for smaller items.
Pop the item to be steamed into a polythene bag (a clear rubble sack is a good choice).
Tape closed the mouth of the bag (gaffa tape) including the hose from the steamer.
Make a small exit hole for the steam at the opposite end of the bag (best to have the bag folded to only have sufficient volume for the piece being steamed).
Let rip with the steam! (Or just turn on the steamer and keep an eye on it).
Once ready, take the piece out (gloves) and quickly clamp it to a former in the desired shape (may be better to overbend it, as some spring-back will happen).
Tips
The length of steaming is trial and error until you gain some experience.
Green wood steams better than dry.
Steaming is somewhat "one shot", and will not steam well a second time (you may notice the wood ends up considerably drier than it started out)
It is possible to "over-steam".