Talk:DIY Heat Bank
Revision as of 13:35, 17 March 2007 by John Stumbles (talk | contribs)
Ah, I see. It would help to draw the direction of water flow onto the PHE. NT 16:42, 16 March 2007 (GMT)
People not familiar with CH systems, which is probably most DIYers, wont know what the A-B device is. Needs marking or abbreviation explained. NT 00:57, 17 March 2007 (GMT)
OK done --John Stumbles 13:35, 17 March 2007 (GMT)
Please Ignore
what follows, it's to go in the article later ...
----------+--- LIVE 240V AC
| |
| 100R
| |
------- === 0.1uF
| PUMP | | 600VDC
------- |
+----------
100R |
--/\/\-------+---------------
| ------------ |
FLOW \ | MT2 | |
SW o | | -----
| | TRIAC | | MOV |
------| G | -----
| MT1 | |
------------ |
|---------------
|
-------------- NEUTRAL
--John Stumbles 13:35, 17 March 2007 (GMT)