Search results

===Mitre Saw (manual)=== [[image:Verstekzaag.jpg|thumb|Manual mitre saw]]

===Spiral saw=== [[image:Spiral saw 0441-5.jpg|right|250px]]

: The width of a [[saw]] blade's cut :Veneer cut in a spiral motion from the trunk. Makes a long seamless veneer with a rougher surface

* Veneer is very prone to chipping when [[Saw|cut]] ...d, scrap wood, [[Papercrete|recycled paper]], bamboo, forest thinnings & [[saw]]mill off-cuts

==Spiral saw== [[image:Rotary drill saw 0441-4.jpg|400px|center]]

...ower than Flat Bits but produce a much cleaner hole, and the length of the spiral means that the hole is more accurate. They are available in standard length There are two types of hole saw.

...h of shank which may be gripped with Mole (Vise) Grips or slotted with a [[saw]] to use a flat bladed screwdriver. You may even be able to use an eccentri ...e as the core size of the thread. In an ideal world this will leave a thin spiral of thread which may be picked out with a pointed stick. The use of left-han

...oles is half a milimetre larger than the narrowest width seen on the screw spiral. ...circular saw blades are available. For occasional work one can use a hand saw or jigsaw. Nails can damage the blades on these, but not the operator.

# saw tooth type used on handsaws ;Circular saw