Search results

===Twisted Pair=== [[image:Twisted pair 0842-7.jpg|right|200px]]

[[image:VIR twisted pair 4841-5.jpg|right|300px]] [[image:Twisted pair 0842-6.jpg|right|350px]]

# Twisted pair rubber wire at [[light]] fitting

...e, I decided that the top of the rails would start adjacent to an existing pair of square steel posts that form a part of the porch. ...of "Heavy hammered" handrail in 40x8mm, 4 matching scroll ends, 6m of 20mm twisted bar, and two ornate brackets. All supplied by [https://www.fhbrundle.co.uk/

...ign of this part of the system is a "star" type topology. Low cost twisted pair cables are run from a central location (the hub) to each room where they wi [[image:4-pair cable.jpg|thumb|Example of a 4-pair cable]]

Another option is to use coloured cable ties, a pair on each end. A choice of 5 colours plus black & natural gives base 7 number # Feed a pair with a [[wallwart]] or [[battery]], locate it at the other end with a torch

...! [[image:290-chimney-damage-2.jpg|left|thumb|Too much wind loading from a pair of aerials, resulting in chimney damage]] ...also tends to make the aerials more directional since signals hitting the pair off the main axis tend to cancel somewhat due to the different signal paths

...ides using the thicknesser. (This only really works on boards that are not twisted, since the thicknesser does not have the capability to remove twist easily ...ops from the same section of 1/2" ply. The ellipses are marked out using a pair of panel pins - one tapped into each foci, and loop of string placed round