Search results
Jump to navigation
Jump to search
- The next best tool is a ring [[spanner]] (wrench) followed by a good quality open ended spanner. ...anners and socket drivers can be extended by the use of tubes and pipes. A ring spanner or socket extension can be pressed in to service to extend an Allen18 KB (3,192 words) - 02:19, 6 September 2017
- * Wall is plastered, the plaster attaches to the ring pulls7 KB (1,056 words) - 02:40, 12 September 2018
- [[image:Hilka hoist stop ring 4260-4.jpg|right|250px]] # Modify the mounting of the autostop sensor ring so that the lifting [[iron wire|wire]] passes through it without fouling.18 KB (3,179 words) - 14:33, 17 October 2017
- * 4 neons with resistors built into a [[plastic]] square ring that mounts behind a light switch faceplate8 KB (1,352 words) - 19:08, 7 October 2014
- ...nsion and the strength of soldered joints. A compression joint with rubber ring is more able to handle slight diffferential thermal expansion.10 KB (1,490 words) - 03:00, 16 November 2014
- ...ilure to clear in some cases. This most commonly applies to spurs on older ring circuits that used a 1mm² cpc/earth conductor rather than the 1.5mm² in m9 KB (1,461 words) - 04:49, 1 December 2012
- ...ected to a pneumatic switch are used on some petrol station forecourts, to ring when a vehicle drives over it. These can be useful on the main property ent * To illuminate a small paper sign or a backlit plastic ring, choose an ultrabright LED. Superbrights arent bright enough.22 KB (3,383 words) - 18:36, 2 March 2017
- fan by turning a ring on the nozzle that moves the plates. Vario nozzles14 KB (2,350 words) - 11:34, 5 April 2010
- * [[Brackets#Ring Brackets|Shelf Brackets]]11 KB (1,546 words) - 09:48, 21 March 2015
- ...en's wanted, it's usually heated to at least 200C in a bucket on a [[gas]] ring. The high temperature plus its sticky nature makes it a serious burn risk,10 KB (1,689 words) - 23:16, 29 July 2020
- ...tegrated into light fittings, power will need to be taken from a radial or ring circuit via a [[fuse]]d spur or similar.12 KB (2,022 words) - 23:15, 23 August 2021
- ...s its possible to surround a window with whole tiles all round. Aligning a ring of tiles round a window is harder than doing a straight line, and typically10 KB (1,764 words) - 21:08, 24 January 2013
- ...by socket circuit. This works, but there's always the possibility of the [[Ring circuit|socket circuit]] being decommissioned later, leaving the [[lighting12 KB (1,854 words) - 09:22, 15 June 2020
- ...sed by professional roofers. Bitumen is melted in a metal pot on a [[gas]] ring at over 200C, the bitumen is spread onto the deck and the felt applied, pre12 KB (2,007 words) - 21:36, 27 September 2014
- ...that is mains powered, and a blue "pro" range cordless tool. These have a ring of registration pins that match the Bosch blade patten:13 KB (2,110 words) - 23:58, 10 September 2018
- |Ring Indicator (RI)12 KB (2,138 words) - 23:52, 29 November 2021
- <span class="font0">'''Appendix 15 '''<span class="font3">Ring and radial final circuit arrangements, Regulation 433.1</span></span>17 KB (2,464 words) - 14:55, 18 November 2018
- ...se areas quickly is to tap the walls all over. I found a 19mm (ie largish) ring spanner made a good sounding tool. Some people can do this, some can't. Wit12 KB (2,279 words) - 23:47, 20 June 2018
- * ring turn, eg Monument * Ring [[spanner]]18 KB (2,563 words) - 17:18, 19 October 2015
- Chain drilling is also possible, but slow & messy. Simply drill a ring of small holes & chisel to finish. Then spend ages chiselling bits off to m13 KB (2,275 words) - 08:52, 19 March 2018