Difference between revisions of "Corrugated fixing"
Jump to navigation
Jump to search
(links, see also, minor tweak) |
|||
Line 1: | Line 1: | ||
− | Metal fixings designed for jointing timber. They consist of a metal corrugated section which is sharpened | + | Metal [[fixings]] designed for jointing [[:Category:Wood|timber]]. They consist of a [[:Category:Metal|metal corrugated section which is sharpened along one edge. They are simply hammered into two adjacent sections of timber forming a bridge between them. Large versions frequently used on [[:Category:Roofing|roof truss assemblies]], and very small ones often used to reinforce [[Bastard mitre joints|mitre joints]] on picture frames. The corrugation adds stiffness to the fixing such that it does not bend or fold while being [[hammer]]ed. |
=See Also= | =See Also= | ||
− | [[Special:Allpages|Wiki Contents]] | + | * [[Special:Allpages|Wiki Contents]] |
+ | * [[Special:Categories|Wiki Subject Categories]] | ||
+ | * [[Screws]] | ||
+ | * [[Fixings]] | ||
− | |||
− | + | [[Category:Fixings]] | |
− | |||
− | |||
− | |||
− | [[Fixings]] |
Revision as of 01:18, 10 January 2009
Metal fixings designed for jointing timber. They consist of a [[:Category:Metal|metal corrugated section which is sharpened along one edge. They are simply hammered into two adjacent sections of timber forming a bridge between them. Large versions frequently used on roof truss assemblies, and very small ones often used to reinforce mitre joints on picture frames. The corrugation adds stiffness to the fixing such that it does not bend or fold while being hammered.