Difference between revisions of "DIY Heat Bank"
Jump to navigation
Jump to search
(abbreviations) |
(update image, add Components section) |
||
| Line 3: | Line 3: | ||
Here's one we made earlier ... | Here's one we made earlier ... | ||
| − | [[Image: | + | [[Image:DIY_heat_bank.jpg]] |
| − | + | == Components == | |
| − | PHE | + | Normal Y-plan (or S-plan, W-plan etc) vented CH+DHW system with |
| − | + | * direct HW cylinder | |
| − | + | * pump (CH circultor) | |
| + | * Plate Heat Exchanger (PHE) | ||
| + | * Thermostatic Mixing Valve (TMV) | ||
| + | * Flow switch | ||
Revision as of 22:41, 16 March 2007
This article is about DIY Heat Banks.
Here's one we made earlier ...
Components
Normal Y-plan (or S-plan, W-plan etc) vented CH+DHW system with
- direct HW cylinder
- pump (CH circultor)
- Plate Heat Exchanger (PHE)
- Thermostatic Mixing Valve (TMV)
- Flow switch