Difference between revisions of "DIY Heat Bank"
Jump to navigation
Jump to search
(update image, add Components section) |
(add PHE data) |
||
Line 13: | Line 13: | ||
* Thermostatic Mixing Valve (TMV) | * Thermostatic Mixing Valve (TMV) | ||
* Flow switch | * Flow switch | ||
+ | |||
+ | === PHE === | ||
+ | From: | ||
+ | GEA-Ecoflex | ||
+ | Unit 8, Waterside Business Park | ||
+ | Redwall Close | ||
+ | Dinnington-Sheffield | ||
+ | S25 3QA | ||
+ | Tel.: +44-(0)1909 551 107 | ||
+ | Fax: +44-(0)1909 550 885 | ||
+ | e-mail: info.uk@gea-ecoflex.com | ||
+ | |||
+ | Copper brazed plate heat exchanger model:- BP12M-20-G1G1 | ||
+ | |||
+ | ====Spec==== | ||
+ | Compact gasket-free Brazed Plate Heat Exchanger consisting of corrugated pressed stainles steel plates (1.4401), which are brazed together with copper in a special vacuum process. Designed, produced and tested in sites with quality systems in accordance with DIN ISO 9002 requirements. Pressure-Vessel Approval according TÜV and EC Pressure-Equipment-Directive (CE). | ||
+ | |||
+ | {| border=1; cellpadding=6 | ||
+ | !colspan=5|Specification for 1 x M12-20-GG | ||
+ | |- | ||
+ | !Operational data: | ||
+ | !Side A | ||
+ | | | ||
+ | !Side B | ||
+ | | | ||
+ | |- | ||
+ | |Media: | ||
+ | |Water | ||
+ | | | ||
+ | |Water | ||
+ | | | ||
+ | |- | ||
+ | |Condition: | ||
+ | |liquid | ||
+ | | | ||
+ | |liquid | ||
+ | | | ||
+ | |- | ||
+ | |Heat exchanged: | ||
+ | | | ||
+ | |50 | ||
+ | | | ||
+ | |kW | ||
+ | |- | ||
+ | |Mass flow: | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |Volume flow: | ||
+ | |0.64 | ||
+ | | | ||
+ | |0.24 | ||
+ | |l/s | ||
+ | |- | ||
+ | |Temperature inlet: | ||
+ | |82 | ||
+ | | | ||
+ | |10 | ||
+ | |°C | ||
+ | |- | ||
+ | |Temperature outlet: | ||
+ | |63 | ||
+ | | | ||
+ | |60 | ||
+ | |°C | ||
+ | |- | ||
+ | |Pressure drop: | ||
+ | |29.65 | ||
+ | | | ||
+ | |3.91 | ||
+ | |kPa | ||
+ | |- | ||
+ | |Surface margin: | ||
+ | | | ||
+ | |1.49 | ||
+ | | | ||
+ | |% | ||
+ | |- | ||
+ | |Content: | ||
+ | | | ||
+ | |0.5 | ||
+ | | | ||
+ | |l | ||
+ | |- | ||
+ | |Heat transfer area: | ||
+ | | | ||
+ | |0.22 | ||
+ | | | ||
+ | |m² | ||
+ | |- | ||
+ | |Design pressure: | ||
+ | | | ||
+ | |30 | ||
+ | | | ||
+ | |bar | ||
+ | |- | ||
+ | |Design temperature: | ||
+ | | | ||
+ | |200 | ||
+ | | | ||
+ | |°C | ||
+ | |} |
Revision as of 07:54, 17 March 2007
This article is about DIY Heat Banks.
Here's one we made earlier ...
Components
Normal Y-plan (or S-plan, W-plan etc) vented CH+DHW system with
- direct HW cylinder
- pump (CH circultor)
- Plate Heat Exchanger (PHE)
- Thermostatic Mixing Valve (TMV)
- Flow switch
PHE
From:
GEA-Ecoflex Unit 8, Waterside Business Park Redwall Close Dinnington-Sheffield S25 3QA Tel.: +44-(0)1909 551 107 Fax: +44-(0)1909 550 885 e-mail: info.uk@gea-ecoflex.com
Copper brazed plate heat exchanger model:- BP12M-20-G1G1
Spec
Compact gasket-free Brazed Plate Heat Exchanger consisting of corrugated pressed stainles steel plates (1.4401), which are brazed together with copper in a special vacuum process. Designed, produced and tested in sites with quality systems in accordance with DIN ISO 9002 requirements. Pressure-Vessel Approval according TÜV and EC Pressure-Equipment-Directive (CE).
Specification for 1 x M12-20-GG | ||||
---|---|---|---|---|
Operational data: | Side A | Side B | ||
Media: | Water | Water | ||
Condition: | liquid | liquid | ||
Heat exchanged: | 50 | kW | ||
Mass flow: | ||||
Volume flow: | 0.64 | 0.24 | l/s | |
Temperature inlet: | 82 | 10 | °C | |
Temperature outlet: | 63 | 60 | °C | |
Pressure drop: | 29.65 | 3.91 | kPa | |
Surface margin: | 1.49 | % | ||
Content: | 0.5 | l | ||
Heat transfer area: | 0.22 | m² | ||
Design pressure: | 30 | bar | ||
Design temperature: | 200 | °C |