Difference between revisions of "Lawn mower"

Revision as of 14:02, 28 August 2014

Cut types

Cylinder mowers

These cut neatest, producing a striped lawn. They use less energy than rotaries for a given job. But they don't tolerate rough ground, can't cut long weeds, and the blade arrangement does need maintenance now & then.

Rotary mowers

More capable all round, light mowers can be lowered onto large weeds, and at a push can even gradually level lumpy ground. The blade can work without maintenance if it must. Stone tolerant to some extent. But results aren't as neat & tidy.

Scythe

Effective for clearing overgrown areas - a long handled scythe can clear as fast or faster than power tools. Correct technique takes a little practice. Obvious injury potential.

Strimmer

Good for edging, much too slow for lawn mowing

Propulsion

Small tractor

Used with gang mowers for the largest areas.

Ride-on

The only good option for large lawns. Top speed varies fairly widely, and can make a big difference.

Self propelled

Good choice for the average lawn

Basic

Wheel size, weight & handle angle determine how much work they are to push. Rollers sink into dips much less than wheels.

Push mower

Some folk like the exercise of a non-powered mower. If you've not tried one the average lawn is fairly demanding, and cutting it in one go is well beyond someone that doesn't get regular exercise.

Cordless

Robot

Blade types

Rotary mowers come with 2 main blade types:

Metal blade:

Keeps on cutting, given an occasional sharpen
Can cut through thick weeds in limited numbers, level molehills etc
Serious foot injury potential

Plastic blades:

Need regular replacement
Muck on the blade holder stubs can cause them to come off frequently
Less effective than metal blades, generally
Don't cut tough weeds
Relatively toe safe
If they keep coming off, try shorter blades

Electrical connectors

Always use a connector with the same number of pins as the flex has cores
NEVER fit a connector with pins on the mains plug side, or you'll have live pins sticking out. Its always socket nearest mains plug, pins nearest appliance.
If the connector has a cover you have to thread the flex through, don't forget to put the cover on first!

Electric vs petrol

Electric:

Lower power generally
Lead gets in way
Risk of chopping lead
Limited range
Cheaper
Near zero maintenance

Petrol:

When it won't start

Fault diagnosis is a wide & complex topic, but the following homes in on the majority of faults.

In most cases the problem is either with fuel or spark. Test for presence of spark with a neon in series with the spark plug lead - keeping yourself well away from the very high voltage. Test for fuel problems by spraying easystart or similar into the air intake and trying to start it.

Historic mowers

There are still some 1950s mowers giving good service. Atco is one of the longest lasting brands. The one thing to beware of is uninsulated sparkplug connections - touching one is not a mistake you'll make a 2nd time!

Safety

The main issues are

Foot injury from metal blades can be severe
Electrical connectors on wet grass - don't mow when wet
Blade cutting electrical lead
CO output from exhaust in a shed/barn. CO can be lethal
Exposed high voltage on spark plugs with historic mowers

@@ Line 4: / Line 4: @@
 ===Rotary mowers===
-More capable all round, light mowers can be lowered onto large weeds, and at a push can even gradually level lumpy ground. The blade can work without maintenance if it must. But results aren't as neat & tidy.
+More capable all round, light mowers can be lowered onto large weeds, and at a push can even gradually level lumpy ground. The blade can work without maintenance if it must. Stone tolerant to some extent. But results aren't as neat & tidy.
 ===Scythe===