Difference between revisions of "Pumps"

Revision as of 16:28, 18 February 2015

All about pumps. Please contribute & help complete the article.

Flow & Head

Maximu flow rate occurs with no resistance, ie no pipe attached to the output, and maximum head figure occurs at about zero flow.

The pump often operates against a column of water (or head) which provides back pressure
Pipes have resistance to water flow

Real life flow can be determined by plotting head (at zero flow) versus flow rate (at zero head) on x & y axes, and drawing a line from max flow to max head. This enables approx flow rates to be read off for any given head. Pump curves page explains this.

More info

More Head Please

Plumbing 2 pumps in series increases the flow rate as shown here: Pumps in series

Pump Power

Pump Materials

Bronze: used for potable water & unsealed uninhibitied CH
Plastics: some are approved for potable water
Iron/steel: for central heating where oxygen is excluded or inhibitor used

Connections

Pump Types

Central Heating circulator

Speed adjustable.
- too fast can cause pumping over & noise
- too slow can cause boiler kettling

Smart pumps adjust speed according to the primary water temp. The pumping energy they save in their lifetime is similar in price to the extra purchase cost.

Shower

Boost shower pressure and thus flow
Boosts bills too.

Sump pump

For draining cellars prone to flooding.
Usually automatically operated by a built-in water sensor
Usually placed in a small dug out lowered area of floor to achieve good floor drainage.

Drill Pump

Small minimal cost pump for occasional clear-up use

Foul Water Pump

Able to handle debris in the water

@@ Line 28: / Line 28: @@
 ** too fast can cause pumping over & noise
 ** too slow can cause boiler kettling
+Smart pumps adjust speed according to the primary water temp. The pumping energy they save in their lifetime is similar in price to the extra purchase cost.
 ===Shower===