Talk:DIY Heat Bank
Revision as of 13:35, 17 March 2007 by John Stumbles (talk | contribs)
Ah, I see. It would help to draw the direction of water flow onto the PHE. NT 16:42, 16 March 2007 (GMT)
People not familiar with CH systems, which is probably most DIYers, wont know what the A-B device is. Needs marking or abbreviation explained. NT 00:57, 17 March 2007 (GMT)
OK done --John Stumbles 13:35, 17 March 2007 (GMT)
Please Ignore
what follows, it's to go in the article later ...
----------+--- LIVE 240V AC | | | 100R | | ------- === 0.1uF | PUMP | | 600VDC ------- | +---------- 100R | --/\/\-------+--------------- | ------------ | FLOW \ | MT2 | | SW o | | ----- | | TRIAC | | MOV | ------| G | ----- | MT1 | | ------------ | |--------------- | -------------- NEUTRAL
--John Stumbles 13:35, 17 March 2007 (GMT)