Difference between revisions of "Talk:Immersion Heaters"
Jump to navigation
Jump to search
(Flexible Cable) |
|||
Line 5: | Line 5: | ||
--[[User:John Stumbles|John Stumbles]] 00:00, 13 June 2007 (BST) | --[[User:John Stumbles|John Stumbles]] 00:00, 13 June 2007 (BST) | ||
+ | |||
+ | == Flexible Cable == | ||
+ | |||
+ | The bit about burning smell etc, talks of checking the flexible cable and that has a link to the "Cables" article.... which only discusses wiring cables, not high temperature insulated flexes. | ||
+ | |||
+ | Sounds like we need a "Flex" article. | ||
+ | |||
+ | --[[User:John Rumm|John Rumm]] 02:54, 16 June 2007 (BST) |
Revision as of 01:54, 16 June 2007
The advice to "wire across the built-in stat and add an external stat strapped to the tank" seems extremely iffy and completely contrary to current regs requiring a manually-resettable over-temperature cutout to be incorporated into the stat.
I think it would be good for an article on immersion heaters to reference this regulation.
--John Stumbles 00:00, 13 June 2007 (BST)
Flexible Cable
The bit about burning smell etc, talks of checking the flexible cable and that has a link to the "Cables" article.... which only discusses wiring cables, not high temperature insulated flexes.
Sounds like we need a "Flex" article.
--John Rumm 02:54, 16 June 2007 (BST)