Difference between revisions of "FAQ Changes"
Jump to navigation
Jump to search
(undamage it) |
(Incorrect wiring for Sundial Y-Plan) |
||
| Line 3: | Line 3: | ||
==Details of change / error== | ==Details of change / error== | ||
| + | http://wiki.diyfaq.org.uk/index.php?title=Central_Heating_Controls_and_Zoning | ||
| − | + | Wiring diagram for Sundial Y-Plan is incorrect - Consider the case where HW cylinder has attained temperature and the programmer subsequently removes the call for HW. With the published wiring, this would result in the boiler continuing to run! | |
| + | |||
| + | I believe the correct wiring for the cylinder stat should be: C -> 6, 1 -> 8, 2 -> 7. | ||
Revision as of 22:45, 24 November 2009
Since the main FAQ is a traditional static web site, it can only be edited by the FAQ maintainer. So if you spot any problems with the main FAQ, or would like to make changes to it, or add articles etc, then please post details of the change to this article. The FAQ maintainer will then review and implement them for you.
Details of change / error
http://wiki.diyfaq.org.uk/index.php?title=Central_Heating_Controls_and_Zoning
Wiring diagram for Sundial Y-Plan is incorrect - Consider the case where HW cylinder has attained temperature and the programmer subsequently removes the call for HW. With the published wiring, this would result in the boiler continuing to run!
I believe the correct wiring for the cylinder stat should be: C -> 6, 1 -> 8, 2 -> 7.