File:Wolfe Island Wind Project Submarine Power Cable.jpg

From DIYWiki
Revision as of 21:17, 26 November 2013 by NT (talk | contribs) (Wolfe_Island_Wind_Project_Submarine_Power_Cable Cross section of submarine power cable used in Wolfe Island Wind Project. Three 230 kV copper conductors enclosed by polyethylene insulation. The six tubes are hollow filler strands. There are 36 individual)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file(2,347 × 2,875 pixels, file size: 1.17 MB, MIME type: image/jpeg)

Wolfe_Island_Wind_Project_Submarine_Power_Cable

Cross section of submarine power cable used in Wolfe Island Wind Project. Three 230 kV copper conductors enclosed by polyethylene insulation. The six tubes are hollow filler strands. There are 36 individual fiber optic lines bundled in the middle of the three fillers at the bottom. Steel strands at the outer layer wrapped in a water-tight covering served as cable armor

(c) 'Z22.' Creative Commons Attribution-Share Alike 3.0 Unported license. http://commons.wikimedia.org/wiki/File:Wolfe_Island_Wind_Project_Submarine_Power_Cable.jpg

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:17, 26 November 2013Thumbnail for version as of 21:17, 26 November 20132,347 × 2,875 (1.17 MB)NT (talk | contribs)Wolfe_Island_Wind_Project_Submarine_Power_Cable Cross section of submarine power cable used in Wolfe Island Wind Project. Three 230 kV copper conductors enclosed by polyethylene insulation. The six tubes are hollow filler strands. There are 36 individual

The following page uses this file:

Metadata