Difference between revisions of "Talk:DIY Heat Bank"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
People not familiar with CH systems, which is probably most DIYers, wont know what the A-B device is. Needs marking or abbreviation explained. | People not familiar with CH systems, which is probably most DIYers, wont know what the A-B device is. Needs marking or abbreviation explained. | ||
[[User:NT|NT]] 00:57, 17 March 2007 (GMT) | [[User:NT|NT]] 00:57, 17 March 2007 (GMT) | ||
+ | |||
+ | OK done --[[User:John Stumbles|John Stumbles]] 13:35, 17 March 2007 (GMT) | ||
+ | |||
+ | ==Please Ignore== | ||
+ | what follows, it's to go in the article later ... | ||
+ | |||
+ | |||
+ | ----------+--- LIVE 240V AC | ||
+ | | | | ||
+ | | 100R | ||
+ | | | | ||
+ | ------- === 0.1uF | ||
+ | | PUMP | | 600VDC | ||
+ | ------- | | ||
+ | +---------- | ||
+ | 100R | | ||
+ | --/\/\-------+--------------- | ||
+ | | ------------ | | ||
+ | FLOW \ | MT2 | | | ||
+ | SW o | | ----- | ||
+ | | | TRIAC | | MOV | | ||
+ | ------| G | ----- | ||
+ | | MT1 | | | ||
+ | ------------ | | ||
+ | |--------------- | ||
+ | | | ||
+ | -------------- NEUTRAL | ||
+ | |||
+ | --[[User:John Stumbles|John Stumbles]] 13:35, 17 March 2007 (GMT) |
Revision as of 13:35, 17 March 2007
Ah, I see. It would help to draw the direction of water flow onto the PHE. NT 16:42, 16 March 2007 (GMT)
People not familiar with CH systems, which is probably most DIYers, wont know what the A-B device is. Needs marking or abbreviation explained. NT 00:57, 17 March 2007 (GMT)
OK done --John Stumbles 13:35, 17 March 2007 (GMT)
Please Ignore
what follows, it's to go in the article later ...
----------+--- LIVE 240V AC | | | 100R | | ------- === 0.1uF | PUMP | | 600VDC ------- | +---------- 100R | --/\/\-------+--------------- | ------------ | FLOW \ | MT2 | | SW o | | ----- | | TRIAC | | MOV | ------| G | ----- | MT1 | | ------------ | |--------------- | -------------- NEUTRAL
--John Stumbles 13:35, 17 March 2007 (GMT)