Difference between revisions of "Talk:Domestic Hot Water Systems"

From DIYWiki
Jump to navigation Jump to search
(started talk/discussion page)
 
Line 12: Line 12:
  
 
[[User:John Stumbles|John Stumbles]] 22:51, 15 December 2006 (GMT)
 
[[User:John Stumbles|John Stumbles]] 22:51, 15 December 2006 (GMT)
 +
 +
----
 +
 +
Ed: I changed back the section on stratification to read "70C at the top and 10C at the bottom" rather than "10C less ..." as you'd amended it. "10C at the bottom" is what I meant to say. If you disagree with the actual figures I've chosen for the example by all means put in some better ones. I plucked the figures out of the air for the sake of illustation but it would be better if they were realistic. I'll go and measure when I'm next out with my IR thermometer and some Round Tuits!

Revision as of 11:51, 21 December 2006

Here is some content to play with for real in the new DIYki (tm) :-)

It's an article I've been sketching out when I've had some Round Tuits to spare and therefore probably a good example of where collaborative wiki-type effort could work i.e. the article might get

  • finished (if wiki articles can every be considered finished)

and

  • published.

It particularly needs some good diagrams and an expanded discussion of unvented DHW systems (especially their control and safety systems).

I have some text on thermal stores and heat banks to go in (when the next Round Tuit comes along)

John Stumbles 22:51, 15 December 2006 (GMT)


Ed: I changed back the section on stratification to read "70C at the top and 10C at the bottom" rather than "10C less ..." as you'd amended it. "10C at the bottom" is what I meant to say. If you disagree with the actual figures I've chosen for the example by all means put in some better ones. I plucked the figures out of the air for the sake of illustation but it would be better if they were realistic. I'll go and measure when I'm next out with my IR thermometer and some Round Tuits!