VHF aerial

From DIYWiki
Revision as of 17:53, 6 March 2009 by NT (talk | contribs) (remove material for the TV aerial article)
Jump to navigation Jump to search

This article is a work in progress. Content should not be relied on yet.

FM radios can give much better reception and often more channels if connected to an aerial.

UK FM radio is transmitted on VHF frequencies, so the terms FM and VHF are often used interchangeably.

VHF Aerial types

3 element FM aerial

These are the best performers for VHF reception. They do however need to be pointed toward the main transmitter, random orientation gives middling results.

VHF / UHF aerial

A small number of TV aerials are designed to give VHF reception as well as UHF. These aerials are easily spotted, they look like standard TV aerials, but have one or 2 elements that are much longer than the others.

These give significantly better VHF reception than UHF only TV aerials, though performance is inferior to a dedicated VHF aerial. The advantage of these is you only need one aerial, one downlead and no combiner.

UHF TV aerial

UHF TV aerials make variable quality VHF FM aerials, but they're often much better than internal VHF antennas, telescopic rods, or the popular rabbit's ears, and most people already have a TV aerial fitted. If you've decided not to spend money on a VHF aerial, in many cases you can get a real improvement in FM reception by using a diplexer at the radio to split off any VHF received by the TV aerial and pass that to the radio.

Performance varies from one TV aerial type to another, and a random UHF aerial may give anything from no signal to a good signal.

Halfwave dipole

Very good

Folded dipole



A ring shaped omnidirectional antenna, these are very common.

Less gain than directional types, but can still often produce a good signal.

Rabbits ears

Rabbits ears are a T shaped piece of twin wire. The ears are moved about to sometimes get passable reception, and typically fixed to the wall with blu-tak.

Although very inferior to rooftop aerials, they're an improvement on a random piece of wire.

Telescopic rod & Wire

Telescopic metal rods and lengths of wire are the lowest performance VHF aerials. However they're often built into radios as they cost so little.

Sometimes the reception of a wire aerial can be improved by snaking it round the mains lead for capacitive coupling.

Mains aerial

The electricity mains is occasionally used as an aerial. This is done by fitting a very low value high voltage class Y capacitor from mains to aerial connection. Sometimes these work usefully, sometimes not. They never make good aerials, but give more signal than a wire aerial wrapped round a lead. They're prone to interference.

If the wrong capacitor type is used it creates a risk of electrocution. Any of the following can create this risk:

  • wrong capacity (eg 0.22uF)
  • wrong voltage rating (eg 250v or 400v)
  • wrong class (eg unclassed, class X)
  • wrong dielectric type (eg paper)

See Also