Uploads by Shed owner
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 15:36, 24 October 2017 | Toolbox-4.jpg (file) |  |
142 KB | Jersey fabric and bin liner | 2 |
| 15:26, 24 October 2017 | Toolbox-15.jpg (file) |  |
296 KB | Another view, showing the pad that separates the top and bottom when the box is closed. | 1 |
| 15:25, 24 October 2017 | Toolbox-14.jpg (file) |  |
322 KB | The foam block placed in an existing box. I used the foam offcuts trimmed from the bottom, packed in under the foam block, to bring it to a pleasing height. | 1 |
| 15:23, 24 October 2017 | Toolbox-13.jpg (file) |  |
176 KB | Working the velvet into place, starting at the lowest spots and leaving a bit of slack between holes. | 1 |
| 15:22, 24 October 2017 | Toolbox-12.jpg (file) |  |
141 KB | This tool fits so closely it may require a cutout so one can grip it to remove it. | 1 |
| 15:21, 24 October 2017 | Toolbox-11.jpg (file) |  |
135 KB | The molded foam with the polyethylene sheet pulled off. | 1 |
| 15:20, 24 October 2017 | Toolbox-10.jpg (file) |  |
139 KB | Removing tools: no leaks! | 1 |
| 15:20, 24 October 2017 | Toolbox-9.jpg (file) |  |
121 KB | Cardboard removed, foam block turned over, tools removed | 1 |
| 15:19, 24 October 2017 | Toolbox-8.jpg (file) |  |
92 KB | Expanding foam, expanding... | 1 |
| 15:19, 24 October 2017 | Toolbox-7.jpg (file) |  |
115 KB | Injection pump providing vaccuum | 1 |
| 15:17, 24 October 2017 | Toolbox-6.jpg (file) |  |
116 KB | Vaccuum connection to bin liner | 1 |
| 15:16, 24 October 2017 | Toolbox-5.jpg (file) |  |
133 KB | Cardboard sides in place, vaccuum pulling bin liner down | 1 |
| 14:47, 24 October 2017 | Toolbox-3.jpg (file) |  |
118 KB | Tools mirrored and taped in place | 1 |
| 14:46, 24 October 2017 | Toolbox-2.jpg (file) |  |
126 KB | Tooll layout | 1 |
| 14:45, 24 October 2017 | Toolbox-1.jpg (file) |  |
77 KB | Cardboard base | 1 |
