Search results

This is a tutorial for terminating MICC / Pyro cable. Note this procedure is suited to "one off" terminations and does not assum [[Image:MICCCable.jpg|thumb|right|PVC-sheathed MICC cable]]

...5BN-F etc. While they actually give you lots of technical detail about the cable in a very short code, they do take quite a bit of deciphering! | Cable conforms with the harmonised standards

...re in which you can run cables. So the only remaining option is to run the cable on the surface. Other times you may not want to disrupt the fabric of the b ...asy to do, but also a bit ugly, and offers no mechanical protection to the cable.

...ticle describes the main characteristics of most of the different types of cable currently used in domestic installations. *Cable and flex for [[Low Voltage Wiring]]

Table 4.2 in the OSG provides the cable cross sectional areas required for a TT main earth connection. These are:

...nsumer unit to the end of the electrical system in the outbuilding "as the cable runs", which may be significantly further. ...rimary problem distance introduces is that of voltage drop. The longer the cable, the bigger its resistance, and the more voltage drop introduced for any gi

: An obsolete [[:Category:Plastics|plastic]] cable, a precursor of [[Cables|pvc]]. It lasts well, and is usually in good condi # A [[Cables|cable]] providing equipotential bonding.

...have not proven to be a significant electrocution risk in themselves. The cable protection requirements of the 17th edition (not to mention the bathroom el ...ion]], does not preclude a non-RCD socket for fridge/freezers provided the cable installation

;Ashathene: An obsolete plastic [[Cables|cable]], a precursor of pvc. ;[[Cables|Cable]]