Search results

...) PAR. 4.2m of 4" T&G for the back. In addition, PVA glue, and some No. 20 biscuits. The finish used here is garnet shellac for the hardwood, and some Liberon ...top shelf. The front lip of the middle shelf is simply fixed with glue and biscuits.

Biscuits are small lozenge shaped wooden tabs made insert the biscuits into the pockets with a little glue and assemble.

* [[Biscuits]]

...onstruction with a hand held machine. Final assembly is done with glue and biscuits. The shelf and lower panel are fixed to the back panel using biscuits and glue. Start my marking the biscuit positions on the each of the parts.

...wood shop, plus some half inch thick T&G boards to make up the back. Glue, biscuits, and a suitable varnish or stain to finish is all that you will need. ...uits were glued and inserted, and each shelf offered up into position. The biscuits allow a little front to back movement so that the back of the shelf can be

...wood shop, plus some half inch thick T&G boards to make up the back. Glue, biscuits and some brad nails and a few screws are used for assembly. The finish is a ...that used for the edges. The joints were supported and aligned with a few biscuits, and glued and clamped until dry:

(normally I would have included a few biscuits in each joint to aid the alignment against the top face when gluing up, but