Search results

Page title matches

• Noisy Pipes
  Box the pipes in. This provides a physical barrier to sound transmission, and creates a v ...nto the ceiling either side of the pipe. Not recommended for incoming cold pipes due to possible condensation.
  5 KB (782 words) - 03:29, 31 July 2020

Page text matches

• First fix & second fix
  ...nd ceilings, and inserting [[cables]] for electrical supply and [[plumbing|pipes]] for [[water]] supply. ...fixtures are connected to the [[cables]], sinks and baths connected to the pipes, and [[Hanging a door|doors]] fitted into doorframes. Second fix work requi
  1 KB (205 words) - 23:09, 12 June 2008
• Decorating Links
  ...roup/uk.d-i-y/browse_frm/thread/af950a45f562b0b3?hl=en# Decorating exposed pipes]
  851 bytes (132 words) - 11:17, 18 November 2011
• 3-dimensional pipe bending
  ...ontal distance from the axis of pipe '''B''' to pipe '''A''' (i.e. if both pipes were longer, how far would they be apart horizontally?). ...es are in line with edges of the box, and the coupling section between the pipes joins opposite corners of the box:
  3 KB (532 words) - 10:49, 14 January 2022
• Noisy Pipes
  Box the pipes in. This provides a physical barrier to sound transmission, and creates a v ...nto the ceiling either side of the pipe. Not recommended for incoming cold pipes due to possible condensation.
  5 KB (782 words) - 03:29, 31 July 2020
• Gas leak
  ...ng Stairs|staircase]]. There is a gas meter and a maze of rusty [[Plumbing|pipes]] that run in all directions. There is a [[:Category:Pests|dead mouse]]. Th > exa pipes
  4 KB (770 words) - 22:46, 24 September 2022
• Lead pipe
  ...nd flashing work. Historically it was also commonly used for water and gas pipes. Although much of this has been replaced with more modern materials, there ...pipe diameter in inches. The weight is specified pounds / yard. So heavier pipes of a given internal diameter achieve the same flow rates as lighter ones, b
  8 KB (1,377 words) - 10:49, 6 April 2023
• Bad Ideas - Floors
  ===Not checking where [[Cables|wires]] & [[Plumbing|pipes]] are before [[Nails|nailing]] flooring down===
  3 KB (421 words) - 09:44, 13 August 2014
• Installing multipoint air conditioning (2)
  ...I had to run pipe around a window unfortunately. Doesn't look so neat. The pipes down from the ceilings I put on the left side of the units and covered in P ...ft the rest to the F-gas fitters. Took 2 man-days for him to braise up the pipes, flush with nitrogen, fill with refrigerant, pressure test and connect the
  6 KB (1,072 words) - 11:08, 14 January 2022
• Air Conditioning in Bedrooms
  ...ou need 400mm of vertical pipework on the left side. This is two insulated pipes, usually in black foam wrap and about 26-28mm diameter. Exposed it looks ho ...drilled the left two at an angle sideways to reduce the bend on the copper pipes behind the unit, the 3rd on the right square to the wall and angled slightl
  6 KB (1,050 words) - 20:14, 18 March 2023
• Installing multipoint air conditioning
  [[File:Dsci0392.jpg|thumb|metal studs with pipes through them|link=http://wiki.diyfaq.org.uk/index.php/File:Dsci0392.jpg]]Th ...ght in coils. My small system needed 1/4 and 3/8 inch piping (metric water pipes can't be used) and joins cannot be made with solder, they must be braised.
  8 KB (1,384 words) - 20:30, 18 March 2023
• Underfloor Heating
  ...range of products which includes multi-layer AluPEX pipes and 5-layer PEX pipes. Their founder (Chris Ingram) is Chairman of the Technical Committee of the
  6 KB (830 words) - 01:13, 7 February 2011
• Safety
  * running electricity cables or electrical fittings near gas pipes * removing walls supporting gas pipes, meters or appliances
  9 KB (1,433 words) - 11:22, 11 May 2010
• Plumbing Links
  ...aaogOmU&list=UUhwPs1xVLtSl6FCMU4i3I_Q&index=4&feature=plcp Clean paint off pipes]
  3 KB (552 words) - 20:17, 5 December 2014
• Replacing a gas combination boiler with a heat pump
  ...e house. The usual prescription is to use the refigerant cycle because the pipes are smaller. Heat is released into a heat store of water inside the house t ...il the new system is in place so the work can be done at a leisurely pace. Pipes, cables, drill a few holes, get a greenhouse or conservatory if you feel li
  4 KB (613 words) - 22:27, 30 June 2023
• Earthing & equipotential bonding
  ...There may, however be earth bonding wires connected onto the water and gas pipes for 'equi-potential bonding' (see below). If there is no electricity compan * Water Pipes
  11 KB (1,751 words) - 02:17, 6 September 2017
• Plumbing
  The art or science of conveying stuff around using pipes (also known as tubing) and [http://en.wikipedia.org/wiki/Fitting fittings]. * Copper pipes are joined by soldering, using a compression fitting, or pushfit connectors
  15 KB (2,471 words) - 12:45, 24 January 2022
• Lighting
  ===Light Pipes=== Light pipes are mirrored tubes that carry skylight from above the [[roof]] down to an i
  8 KB (1,233 words) - 22:23, 15 December 2019
• Earthing and Bonding
  ...interconnection of incoming (metallic) services (e.g. water, gas, and oil pipes) plus any extraneous conductive parts of a building (like the metal framewo ...What it does is electrically tie together all accessible conductive parts (pipes, taps, electrical appliances etc) that could under fault conditions introdu
  12 KB (1,937 words) - 23:06, 31 January 2024
• Waste pipe
  * Solvent weld pipes are slightly larger in diameter than the nominal size (so 40mm pipe actuall * Solvent weld pipes are generally all the same real size regardless of manufacturer.
  9 KB (1,454 words) - 08:43, 8 January 2019
• Central Heating Repair
  ...t, but not necessarily that it has succeeded in doing so.<br><br>Check the pipes connected to the boiler: at least one should be getting hot (too hot to hol * rushing noises from pipes and radiators - air in system?
  7 KB (1,208 words) - 12:45, 19 January 2009
• Pipe repair
  ...to be used dry. Choice is yours, fwiw I find they're more reliable on old pipes with putty. There are plumbing specific sealants, and any sealant used on p For copper pipes you can't move at all you'll need either a flexible connector as shown, or
  4 KB (732 words) - 01:09, 30 November 2014
• The Dream class of monobloc heat pumps
  The domestic ASHP has inch male BSP threads for water in-out pipes. It needs a dedicated 240 volt supply from a circuit-breaker in your electr
  2 KB (326 words) - 18:21, 6 December 2022
• Andy Hall of Fame
  ...ry thick Armourflex insulation (IIRC I used the 22mm thick stuff). The pipes were then threaded through 150mm soil pipe from end to end with the pipe bu
  4 KB (738 words) - 21:51, 28 April 2010
• Pumps
  * Pipes have resistance to water flow
  3 KB (408 words) - 03:49, 10 January 2018
• Intumescent Materials
  Non setting intumescent [[Putty & Mastic|putty]] fills gaps where [[Plumbing|pipes]] pass through walls. It allows pipe movement, and can be removed and reuse
  3 KB (392 words) - 01:25, 5 December 2014
• Water softeners
  ...ich merely attempt to prevent these chemicals depositing themselves inside pipes, tanks and shower heads. Nor should it be confused with a water FILTER, whi * No scaling of pipes, kettles, tanks, baths, showers etc.
  6 KB (1,104 words) - 10:59, 7 January 2022
• Drain Heat Exchanger
  ...body of water that stores recovered heat so that simultaneous flow in both pipes is not needed to recover and use the heat. [http://www.eere.energy.gov/cons * 4 parallel microbore pipes are wound round the drain pipe in parallel,
  10 KB (1,490 words) - 03:00, 16 November 2014
• Wiring regs history
  ...plastic supply pipes, or metal services connected to plastic installation pipes are excluded from the requirement to be bonded.
  5 KB (753 words) - 12:42, 19 May 2022
• Earth Cooling Tubes
  ..., smooth-walled, rigid or semi-rigid plastic or metal [[:Category:Plumbing|pipes]], buried 6 to 10 feet (1.5 to 3m) underground where the temperature is typ
  4 KB (673 words) - 00:40, 9 December 2010
• Rainwater Harvesting & Use
  ...rs, was reported to lose over 300 billion litres per annum through leaking pipes. That's almost a billion litres a day, and from just one company. [http://w # [[Plumbing|Pipes]] have resistance to water flow
  7 KB (1,141 words) - 13:44, 7 April 2012
• The Self-Uninstalling Gas Water Heater
  ...letely separated. This was followed by cold water coming back into the hot pipes, which reset all the solder joints (not how they were before). It then pick
  3 KB (554 words) - 10:22, 7 January 2022
• Appliance parts
  ...be had cheaper or more conveniently from suppliers to other industries, eg pipes & pipe clips from car accessory shops, aquarium supply shops or industrial
  3 KB (469 words) - 02:25, 4 September 2017
• The tale of the rubbing pipe
  ...s article, perhaps "tale of woe" or "what happens when you rub a couple of pipes together" might cover it.... ...laster ceiling. No holes visible in the roof, so attention switches to the pipes. Above it is the rather innocent looking:
  7 KB (1,224 words) - 03:29, 17 July 2013
• Duct Tape
  * Temporary patching of leaking [[Plumbing|pipes]] at low pressure (ie not [[water]] at mains pressure)
  3 KB (479 words) - 15:42, 12 June 2018
• Patching plasterboard
  ...al#Plasterboard|plasterboard]] for any reason (to gain access to wires and pipes etc), one handy tip is to keep the bit of board you cut out - since it can
  3 KB (572 words) - 21:19, 13 April 2018
• Electrical Testing
  ...ou boxed in any such strips so they can't be seen? If you covered the ugly pipes then you need to unscrew enough for a visual inspection. Or maybe find a pr
  6 KB (1,076 words) - 18:50, 26 October 2022
• Wall chaser
  Quickly cuts chases (i.e. slots) in solid walls, so that cables and pipes may be buried and hidden from view. This is a job that was traditionally do ...get much warning when you chop through a live wire or your central heating pipes!
  11 KB (1,985 words) - 17:30, 10 May 2017
• Compression fitting
  * Can be used on wet and dripping pipes The pipe needs to be cut square and cleanly, with any burrs removed. Pipes cut with a pipe cutter are much easier to use than those cut with a saw. Th
  14 KB (2,426 words) - 16:36, 25 February 2024
• Flooding
  Lagging pipes exposed to freezing conditions can reduce the chance of a freeze burst.
  4 KB (627 words) - 14:40, 7 September 2012
• Central Heating maintenance without draining down
  ...sure in the system - static pressure from the total "head" of water in the pipes, and elastic pressure provided by the expansion vessel. ...t of conical rubber bungs from a plumbers merchant designed to block these pipes. One you stuff up the vent pipe, the other to reach into the tank of water
  11 KB (1,971 words) - 11:37, 14 July 2022
• Central heating design
  *Small-bore pipes must usually be run in notches in the top of joists: susceptible to damage *Micro-bore pipes may be threaded through holes in joists out of reach of nailing
  25 KB (4,005 words) - 22:17, 4 November 2021
• Central Heating Operation
  ...hing the system fully off instead can sometimes result in water or heating pipes freezing and bursting, potentially causing thousands of pounds of damage.
  4 KB (717 words) - 15:12, 7 April 2012
• Plasterboarding
  ==Cables & pipes== Steel plates are cheaply available to protect pipes & wires where they pass through uprights. It takes little effort to fit the
  16 KB (2,711 words) - 03:40, 21 November 2014
• Solar Thermal
  * [[#Pool Heating|Pool heating]] pipes buried in path or drive Water ruptures metal pipes when it freezes, and solar hot water systems must avoid this.
  30 KB (4,902 words) - 15:18, 11 August 2012
• Monobloc Air to Water small
  ...left when the bath was replaced by the shower cubicle. My old circulating pipes run floor to ceiling, an overhead pair to lounge and kitchen, underfloor to ...ths of galvanised 150mm cable tray screwed to the wall above and below the pipes and box them in with 60mm Kingspan Styrozone XPS, which is tough. insulatin
  14 KB (2,541 words) - 16:23, 6 December 2022
• Split-type Room Air Conditioner
  ...utdoor unit, connected together by a refrigerant flowing through a pair of pipes. The design puts the bulk of the equipment out of doors, leaving a reasonab ...his implies, the indoor unit must go on an outside wall. When you bend the pipes, the smallest radius you can hope to achieve is about 100 mm, with 120 mm o
  51 KB (9,092 words) - 18:39, 4 November 2021
• Gas pipe sizing
  ...roportional to its length and the rate of gas flow through it. i.e. longer pipes and/or higher rates of gas flow will result in more pressure drop. ...being split with a tee just after the meter. That then allows us to revert pipes A, and C to 22mm, since they now only need to carry 2.1 m³/h of gas. If we
  11 KB (1,746 words) - 15:13, 24 January 2022
• Library chair
  ...those library style chairs that can turn into a set of steps". Then a mate pipes up with a comment to the effect that he has also always wanted one of those
  5 KB (854 words) - 15:32, 28 June 2016
• Acid
  * Destroys [[cement]] joints in ceramic pipes * Destroys [[cement]] joints in ceramic pipes
  11 KB (1,759 words) - 19:18, 21 October 2015
• Oscillating tools
  ...at cuts can be plunged into a board directly above a joist with no risk to pipes or cables under the floor. ...that enables them to cut flush with a surface. This is ideal for cropping pipes against a wall, or undercutting a door frame to allow a wood floor to slide
  13 KB (2,110 words) - 23:58, 10 September 2018

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)