Search results

• Cement
  ===Resin=== ...concrete repair option is resin. [[Adhesive|Epoxy, vinylester or polyester resin]] is injected into the crack. Epoxy is used for structural repairs.
  27 KB (4,355 words) - 00:25, 26 September 2016
• The never ending patio rebuild
  ...that passed through the flank wall) and tapped some 12mm rod home into the resin. Once this had set (about 15 mins in the summer heat!) ...nut in turn to slowly pull the bits of wall together. I pumped a bit more resin into the join before bringing it tight.
  34 KB (6,226 words) - 03:03, 20 September 2023
• DIY Web Sites
  ...strial-flooring.co.uk Industrial Flooring Services] epoxy resin coatings, resin based overlays and patch repair products for floors.
  19 KB (2,776 words) - 21:21, 24 March 2020
• Crack repair
  ...[[brick]] or block work. While this is exposed, it can be bonded with a [[resin]] filler that remains very slightly flexible.
  9 KB (1,504 words) - 08:44, 11 September 2019
• Overhead rail goods lift
  ...s [[drill]]ed in the wall. For exterior walls the rods could be [[Adhesive|resin]] fixed into the wall. ...ength walls, sufficient pullout strength may need to be tested. [[Adhesive|Resin]] fixing is the strongest option, if needed.
  18 KB (3,179 words) - 14:33, 17 October 2017
• Sandpaper
  ...anding and is not waterproof. Waterproof or '''wet/dry''' sandpapers use a resin glue and a waterproof backing.
  10 KB (1,552 words) - 20:39, 20 October 2011
• Hex bits
  ...required length and push it down the recess, holding it in with [[Adhesive|resin glue]] or a slip of paper down one side.
  10 KB (1,674 words) - 19:40, 23 March 2014
• Carpet Cleaning FAQ
  SD No. 8 removes stains such as candle-wax, paint, resin, tar and wax polish.
  16 KB (2,709 words) - 20:13, 25 September 2010
• Carpet laying
  * rubber resin - very tough
  12 KB (1,971 words) - 16:47, 12 February 2012
• Ceiling fan
  ...ended. For blades with a cane side where the cane is uppermost, [[Adhesive|resin glue]] & sand can be used on the outer end of the cane to add weight. Anoth
  11 KB (1,912 words) - 07:28, 27 October 2013
• Motor repair
  ...ead is damaged the fan blade may be welded, or glued with [[Adhesive|epoxy resin]], with caveats. The glue may see high operating temperatures and/or high v
  14 KB (2,327 words) - 04:05, 7 March 2015
• Decorating FAQ
  ...s - one as Colin suggests involves basically filling the scratch in with a resin having the same refractive index as the glass, so it doesn't show, and the
  12 KB (2,108 words) - 05:58, 7 March 2015
• Glossary
  : A tough durable filler made from polyester resin with inert fillers. : a tough synthetic 2 part resin mainly used as a [[:Category:Adhesives|glue]]. Araldite is a well known bra
  59 KB (8,842 words) - 21:43, 1 November 2021
• Nailer
  ...gement. All without the hassle of pre [[drill bit|drilling]] or [[Adhesive|resin]] bonding of the threaded stud.</p>
  17 KB (2,845 words) - 17:23, 9 August 2013
• Timber basics
  [[image:Spruce resin 563-3.jpg|thumb|Spruce]]
  16 KB (2,610 words) - 07:23, 18 March 2015
• Bracket
  # Put resin in the holes
  21 KB (2,706 words) - 11:27, 5 June 2012
• Paint
  * [[Adhesive|Resin]] based * Synthetic resin
  35 KB (5,634 words) - 02:07, 5 May 2015
• Angle grinder
  These are a thin flexible fibre disc with abrasive resin bonded to one side of it. They need to be used with a backing pad.
  20 KB (3,302 words) - 19:26, 8 January 2022
• The secret diary of a bathroom refurbishment
  ...onduit onto the mortar bed running front to back. That way the heavy stone resin tray could be set down on something that will keep it suspended above the l
  48 KB (8,920 words) - 13:07, 28 December 2021

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)