Search results

#Strip the unit and remove the circuit board (just a few plastic clips, no screws). #Remove the LCD assembly from the circuit board (more plastic clips and an eight pin push connection).

...the event of a fire. This applies throughout the [[Electrical_Installation#Clips|installation]] and not just in escape routes. This new requirement will mak ...in [[glue]] can go into masonry [[Drill bit|holes]] instead, and the cable clips whacked in once set.

* Clips * Cladding Clips

...ial between the pipe and wall in roughly the half way point between 2 pipe clips. Do this in a few locations. The material can be expanded polystyrene, soli ...e a weight on the pipe on every other section of pipe run (ie between pipe clips 1&2, 3&4 etc). This changes the resonant frequency of different pipe sectio

...e the suitably-sized round cable clips designed for mains use. Avoid using clips which deform the cable, as occurs with some non-mains clip types.

.... Avoid using clips which deform the cable, such as [[fence|fencing]] wire clips.

==Clips== Different types and brands of pipe clips have differing pipe to wall spacing.

...r or more conveniently from suppliers to other industries, eg pipes & pipe clips from car accessory shops, aquarium supply shops or industrial hose supplier

I ditched the quick release spring clips that were supposed to set the height of the handle and bolted it firmly in

===Isolation clips===

...objects can be made from rigid iron wire. Some examples are corner braces, clips, hooks, tool stands, simple hinges & door catches, and many other items, bo * Paper clips are spring steel, making them tough and springy. They can be re-worked to m

...dge of the front panel allows that to be removed once the two metal spring clips are depressed to free the panel. That then lifts off the top of the case. Y ...rn push fit connections need to be freed. First remove the metal retaining clips on the base of the HX. These pipes will usually have a little wiggle room,

[[image:spring balance clips 214a921-2.jpg|right|125px]]

...ut bottom edge, and attach over the cardboard/tools/bin liner using binder clips. [[Tape]]d gaps on the inside to keep foam inside.

...in plastic trunking or in plastic conduit will also need additional metal clips.

...hSGS43A07.JPG|caption|frame|left|Remove the two screws that hold the white clips down, and the two screws that hold down the grey riser foot.]] [[image:BoschSGS43A09.JPG|caption|frame|left|Gently release the clips either side of the riser and lift it clear.]]

*Uninsulated metal cable clips/cleats: still in use in the 70s

...types of fencing clip are available to attach panel to [[timber]] post. No clips are required with [[concrete]] posts, the panels just slot in. But with the [[image:Fence clips 5431-2.jpg|right|190px]]

...t, that is held in place with a clip of some kind. Stainless steel jubilee clips can work well. Mild steel ones are less favoured since they will tend to ru

*[http://www.mossplastics.com Moss Plastic Parts] Rivets, assembly clips, plastic screws, nylon nuts, nylon washers, fixing rings, retaining rings

...ring generally doesn't use cord grips as its fixed still, whether by cable clips or due to inaccessibility.

...of the meter, stop cock etc. It is convenient to use purpose-made bonding clips (obtainable from most d-i-y stores) which include a label "SAFETY ELECTRICA

* Row of clips

...the most basic option, cable clipped directly onto the surface using cable clips or cleats. Its simple and easy to do, but also a bit ugly, and offers no me

The tube should be mounted to the cupboard underside with clips, and the control gear housed in a separate box. Standard ceiling fittings a ...he end pins are visible, with nothing connected to them. Tool clips (terry clips) are a simple option.

====Clips==== Unless otherwise supported, cables should be supported by [[Cable_clip|clips]] at regular intervals:

;Cable clips : Clips that hold [[Cables|cable]] in place. Usually a [[:Category:Plastics|plastic

.... Jubilee hose clips are less likely to cause pipe failure than wire based clips, or tied [[Iron wire|wire]].

* Bit of flexible sawblade clips into metal base type holesaws are very weak and must be used with care

...s and other cable support systems. (One handy tip when using the large "P" clips with SWA cable on hard surfaces, is to drill a 5mm hole first, and tap in a

...dwood screwed to the building, with the pipes and cable secured in metal P clips with rubber inserts. This gives a stand-off between the pipes and the wall ...looks like electrical conduit to me. This size of pipe can use the same P clips as the insulated pipes for the system. This about 3 metres long, and it car

;Cable clips : Clips that hold cable in place. Usually a [[:Category:Plastics|plastic]] clip fix

...ds to enable the one tube to span a whole run. The tube is mounted only on clips, with the electronic ballast being placed elsewhere out of view - the popul