Search results

Page title matches

• Key cutting
  ...It requires precise [[Die grinder|grinding]], needing decent eyesight. DIY key copies do have a failure rate. [[image:Key diagram 5379-4.jpg|400px]]
  3 KB (487 words) - 14:22, 16 October 2014
• Copy a key
  #REDIRECT [[Key cutting]]
  25 bytes (3 words) - 08:20, 25 February 2012

Page text matches

• Security Links
  [http://www.thesafeshop.co.uk/products/ge-c500-police-approved-keysafe.html Key safe], a police approved one. (Not a seller recommendation) [https://groups.google.com/forum/#!topic/uk.d-i-y/EfunwJ_bZFQ Key snapped off in cylinder lock]
  813 bytes (114 words) - 09:34, 18 March 2015
• Key cutting
  ...It requires precise [[Die grinder|grinding]], needing decent eyesight. DIY key copies do have a failure rate. [[image:Key diagram 5379-4.jpg|400px]]
  3 KB (487 words) - 14:22, 16 October 2014
• Rekey a lock cylinder
  ...in reversal rekeying, or upto 10 if making a lock fit an existing set of [[Key cutting|keys]]. ...ak in each pin stack lines up with the key barrel/body shear line, and the key barrel can thus rotate.
  5 KB (822 words) - 00:13, 23 July 2019
• Padlock
  * Trivially easy to open without the key * At the bottom of the market, other samples may use the same key as yours
  2 KB (337 words) - 17:31, 12 March 2018
• Electrical regulations
  .../Building/Building-standards/techbooks/techhandbooks Technical Handbooks & Key Supporting Guidance]
  530 bytes (58 words) - 20:02, 11 September 2017
• Replace a eurolock cylinder
  Eurolocks are a modern pattern of cylinder deadlock. As well as key operation, thumbturn cylinders are available, mainly for bathrooms, bedroom Replacing a eurolock key cylinder is very easy, you just need to get the right length of cylinder to
  6 KB (1,019 words) - 22:08, 9 May 2013
• Rekey a lever lock
  ...lever positions. The new lever arrangement must be symmetrical so the same key can operate it from both sides. So if the levers are numbered 1-5 from one ...st in the correct unlocking position when the matching landing area on the key is deeper.
  3 KB (461 words) - 22:07, 10 October 2013
• Making equally spaced cuts
  ...artly through it. This will create a notch to which we will fit the spacer key. The notch will be an exact match for the cutter width. # Cut a key from some scrap that is a snug fit for the notch, and glue it into place in
  3 KB (460 words) - 22:52, 9 July 2016
• Paint Links
  ...google.com/group/uk.d-i-y/browse_frm/thread/07e6610bd11392f7?hl=en# Repair key damaged car paint]
  2 KB (289 words) - 20:50, 21 January 2019
• Replace a lock cylinder
  The lock itself is not usually replaced, just the key cylinder, which is bought separately. It's a mostly simple job to fit a new ...ut unless they come with 3 keys they're often a false economy, as just one key copy costs as much as a new cylinder with keys.
  9 KB (1,536 words) - 00:59, 14 May 2017
• The Dream class of monobloc heat pumps
  ...the unit. It has no pump, only a switched connection to run one . It has a key-pad to change seasonal settings but no useable controls except the run-stan ...ut temperature (3) return temperature. The last two can be set through the key-pad. It also monitors its internal refrigerant health. The only other contr
  2 KB (326 words) - 18:21, 6 December 2022
• Local energy advisor scam
  ...o he speaks, and waits for a reply, and what he says next is guided by any key words recognised in the response.
  906 bytes (159 words) - 15:13, 3 September 2023
• Home security
  ...often also be able to carry less. So, fit at least one lock which needs a key to open it to all doors and don't leave the keys either in the locks or nea ...nto the striking plate. Key deadlocking usually needs an extra turn of the key.
  16 KB (2,864 words) - 02:35, 13 January 2023
• HTML Email in Thunderbird
  You can change mode on on the fly by holding the Shift key when you click the new email button. That will cause Thunderbird to start a
  1 KB (227 words) - 01:07, 28 February 2024
• Security FAQ
  ...often also be able to carry less. So, fit at least one lock which needs a key to open it to all [[door]]s and don't leave the keys either in the locks or ...nto the striking plate. Key deadlocking usually needs an extra turn of the key.
  16 KB (2,918 words) - 12:37, 3 October 2018
• Wiring regs history
  ===Some key highlights of the changes are:===
  5 KB (753 words) - 12:42, 19 May 2022
• Bandsaw
  ...jury by people unable to behave themselves - as long as they don't get the key
  6 KB (959 words) - 01:12, 14 September 2013
• Door Security
  ...tted because people didn't lock their doors or didn't close the windows. A key left under something outside is another burglar's favourite. When burglary ...lace with one [[bolt]] into the side of the cylinder. Undo this & turn the key part way, and it slides out.
  16 KB (2,638 words) - 02:07, 10 November 2014
• Vehicle
  ...everse puts the rear-parking camera on the tablet screen. To run, turn the key, wait 5 seconds for the tablet to boot, just like a computer. The air-con u ...witch off and on again, usually only to neutral but I have had to turn the key off twice. This is embarrassing at a T-junction or lights. Waiting for an u
  7 KB (1,256 words) - 23:38, 17 February 2023
• Mains plug
  Other key features include sockets with safety shutters - preventing items being poke
  2 KB (399 words) - 11:18, 8 June 2022
• Washing Machine Smells
  The key to the most effective detergents is to use a mix of chemicals, each compone
  3 KB (424 words) - 04:12, 9 February 2013
• Sealed system FAQ
  ...ts for a few pounds. B-W have introduced a new range which uses a smaller key but the comments apply. ...small key provided which operates through a quarter turn. If you lose the key a screwdriver will work fine (chubby version if access is limited). Some mo
  17 KB (3,123 words) - 00:17, 25 March 2014
• DIYFAQ History
  |+Key Dates
  3 KB (570 words) - 01:39, 11 February 2023
• Swimming Pool Steps
  ...sy, as well as a place to sit and paddle should the need take you. Another key requirement, was they must fold up for storage, so they can be wrapped in a
  4 KB (721 words) - 17:22, 5 August 2015
• Central Heating Operation
  ...little bleed screw at one end of the top of the radiator using a radiator key or pliers. Air will escape with a hiss, when the hissing stops and just wat
  4 KB (717 words) - 15:12, 7 April 2012
• Oil
  ...applied all round the key's stem, and the key pressed back in. After a few key presses the stem is then lined with a film of oil, and even unusably stiff
  21 KB (3,417 words) - 22:19, 27 April 2018
• Aerial amplifier
  ...ut can not undo loss of S/N ratio that has already occurred, and this is a key spec for picture quality.
  5 KB (868 words) - 09:26, 24 March 2014
• Replace a radiator
  [[image:Radiator key 4620-2.jpg|150px]] The radiators were all bled. Loosen the bleed valve with a bleeding key, air hisses out, once water begins to come out do it up again, not very tig
  11 KB (1,898 words) - 00:17, 13 December 2017
• Reciprocating saw
  ...e mechanism is also highly desirable (budget saws tend to require an Allen key for blade changes). A few saws also include an orbital blade action. This c
  6 KB (1,145 words) - 01:14, 21 September 2023
• Lawnflite 703 Autodrive blade clutch replacement
  ...inside of the hole through the clutch that you will need to align with the key way on the motor shaft.
  7 KB (1,173 words) - 18:56, 2 July 2022
• Drill buying guide
  ...ned at least as well or better than conventional chucks that require chuck key. The poorer keyless chucks are not as good as a keyed one in ultimate gripp
  7 KB (1,211 words) - 02:44, 2 May 2023
• Timber basics
  This article is a quick guide to the key concepts relating to timber. For more depth and further topics, see [[Timbe Grading is an assessment of the structural strength of the timber. Key features assessed in grading are splits and knots, especially large knots a
  16 KB (2,610 words) - 07:23, 18 March 2015
• Microwave repair
  ...ing of the behaviour of microwave rf is advisable if replacing magnetrons. Key safety issues are anything but obvious if you don't have such knowledge. ...hock. In a microwave oven the fuse performs an important extra role. Its a key part of the safety interlock system preventing users being microwaved. When
  16 KB (2,642 words) - 21:10, 11 November 2013
• Phone stand and desk tidy
  ...ike! The bottom drawer holds some banking card readers, and other security key devices.
  7 KB (1,382 words) - 10:16, 14 August 2023
• Threaded fasteners FAQ
  ...panner or socket extension can be pressed in to service to extend an Allen key. Application of a [[hammer]] (preferably rawhide or lead) or the heel of th ...ally impossible to drill. Some people prefer to hammer a sharpened hexagon key into a hole drilled in the end of the fastener, if ground flat at the end t
  18 KB (3,192 words) - 02:19, 6 September 2017
• Crack repair
  ...[screwdriver]] to make the crack wider and deeper. This creates a proper [[key]] for the filler, and also means you are using enough of the filler that it
  9 KB (1,504 words) - 08:44, 11 September 2019
• Drilling FAQ
  ...ut the bit into the chuck, and tighten it finger tight. Then use the chuck key in all three holes in turn tightening firmly, and then go round again in al ...k key built in to the drill, you can buy one from a tool shop, or keep the key in the chuck, or better still, tie it to the mains flex some 18" from the d
  32 KB (5,862 words) - 23:31, 30 August 2016
• Newsgroup access tips
  ...f in many different directions at once. (this thread "drift" is one of the key features of usenet groups than can make them both very interesting and at t ...t you will not see them as you advance to the next unread message when you key "n".
  22 KB (3,663 words) - 13:09, 14 January 2024
• Choosing a plug fuse
  The key to stopping this from happening, is to interrupt the current flow very quic
  12 KB (2,048 words) - 11:40, 17 August 2022
• Pattress
  ...the one box. Available accessories include various switches, [[dimmer]]s, key switches, indicators, etc. The accessories don't have any face plate, a sin
  12 KB (1,854 words) - 09:22, 15 June 2020
• Router
  ...mechanism - the less play or backlash in it, the better. Smoothness is the key.
  12 KB (2,116 words) - 18:44, 17 May 2013
• DIY Personal Video Recorder (PVR)
  ...TV services, the PVR is no longer relevant. However there are a number of key benefits you get with a PVR that you don't get with streaming services:
  12 KB (2,109 words) - 17:29, 9 November 2021
• Silicone
  ...t cannot completely eliminate movement between the parts to be sealed. Its key benefits are:
  14 KB (2,193 words) - 13:53, 4 March 2024
• Solar Thermal
  ...only so much water heating bill that can be replaced with solar heat. The key to effective payback is thus to keep system costs low while maintaining an Performance and payback are both key issues with solar thermal technology. There are designs in use that deliver
  30 KB (4,902 words) - 15:18, 11 August 2012
• Drawers
  Key operated drawer [[Door Security|locks]] are occasionally seen, and can be b
  13 KB (2,120 words) - 18:11, 25 November 2022
• Central Heating Controls and Zoning
  ...ually used, sometimes a type which could only be operated by a square-head key rather than having a wheel-head. This was adjusted to try to allow sufficie
  18 KB (2,996 words) - 12:00, 24 September 2022
• Nailer
  ...t any special tools, while others require several different sizes of Allen key!
  17 KB (2,845 words) - 17:23, 9 August 2013
• Plasterboarding
  ...[[paint]]ed surfaces should be scored with a blade or scrabbler to form a key, and a coat of dilute (1:1) [[Adhesive|PVA]] and [[water]] applied prior to
  16 KB (2,711 words) - 03:40, 21 November 2014
• Built in office furniture
  ...too small, and full of too much stuff, and better organise it! One of the key problems was the rear corner. In an alcove beside a chimney breast, there w
  19 KB (3,569 words) - 05:08, 1 December 2012
• Bracket
  ...are driven with a socket or ratchet spanner, or allen heads with an allen key.
  21 KB (2,706 words) - 11:27, 5 June 2012
• Overhead rail goods lift
  ...th it, it should be fitted with some way to prevent use. Options include a key operated switch, or a removable control switch [[Flex|lead]] or power lead,
  18 KB (3,179 words) - 14:33, 17 October 2017
• DIY Loft conversion
  ...so often so as to make a better key for the render. In addition to helping key the render to the wall, the mesh should end up more deeply bonded into the One of the key requirements for the front roof section is the construction of the dwarf wa
  69 KB (12,721 words) - 22:49, 31 January 2024
• Angle grinder
  * No-[[spanner]] nuts, with a hinge-out [[:Category:Security|key]] for disk changing.
  20 KB (3,302 words) - 19:26, 8 January 2022
• DIY Computer backup
  (make sure you have a hard copy of the decryption key or passphrase that is not held just on the computer)
  26 KB (4,510 words) - 00:03, 7 October 2023
• Central heating design
  ...ith water introduced to the system by a temporary filling hose (or special key-operated device built-in to the boiler). More info can be found in [[Sealed
  25 KB (4,005 words) - 22:17, 4 November 2021
• Glossary
  ;Allen key: hexagonal profile L shaped bar used for driving screws with a hexagonal re ...Lock barrel'''. The part of a nightlatch (lock) mechanism that accepts the key.
  59 KB (8,842 words) - 21:43, 1 November 2021
• Screws
  A drawback with allen key driven heads is that attempting to drive them using the wrong size bit can
  34 KB (5,484 words) - 16:38, 8 June 2020
• Electrical Installation
  They key to success with any cable pulling technique is making sure that the join be
  47 KB (8,300 words) - 01:11, 29 May 2022
• Boiler repair
  * Hex key wrenches or hex drivers.
  51 KB (8,883 words) - 10:51, 26 July 2017